WAGO 788 Series Interface Relay, DIN Rail Mount, 24V dc Coil, DPDT, 2-Pole
- RS 제품 번호:
- 180-3039
- Distrelec 제품 번호:
- 304-10-815
- 제조사 부품 번호:
- 788-390
- 제조업체:
- WAGO
Subtotal (1 unit)*
₩60,254.00
재고있음
- 10 개 단위 배송 준비 완료
- 추가로 2026년 3월 12일 부터 30 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩60,254.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 180-3039
- Distrelec 제품 번호:
- 304-10-815
- 제조사 부품 번호:
- 788-390
- 제조업체:
- WAGO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | WAGO | |
| Coil Voltage | 24V dc | |
| Contact Configuration | DPDT | |
| Mounting Type | DIN Rail | |
| Series | 788 | |
| Number of Poles | 2 | |
| Terminal Type | Cage Clamp | |
| Depth | 86 mm | |
| Height | 73mm | |
| Length | 15mm | |
| Contact Material | Silver Alloy | |
| Relay Switching Classification | Miniature Relay | |
| Special Features | IP20 Degree of Protection, LED Indication, Mechanical Indication | |
| Minimum Operating Temperature | -40°C | |
| Life | 10 x 10^3 cycles | |
| Maximum Operating Temperature | +70°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 WAGO | ||
Coil Voltage 24V dc | ||
Contact Configuration DPDT | ||
Mounting Type DIN Rail | ||
Series 788 | ||
Number of Poles 2 | ||
Terminal Type Cage Clamp | ||
Depth 86 mm | ||
Height 73mm | ||
Length 15mm | ||
Contact Material Silver Alloy | ||
Relay Switching Classification Miniature Relay | ||
Special Features IP20 Degree of Protection, LED Indication, Mechanical Indication | ||
Minimum Operating Temperature -40°C | ||
Life 10 x 10^3 cycles | ||
Maximum Operating Temperature +70°C | ||
- COO (Country of Origin):
- DE
Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Path, Red status indicator, Module width: 15 mm
Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
관련된 링크들
- WAGO 788 Series Interface Relay, DIN Rail Mount, 24V ac Coil, DPDT, 8A Load
- WAGO 788 Series Interface Relay, DIN Rail Mount, 12V dc Coil, DPDT, 8A Load
- WAGO 788 Series Interface Relay, DIN Rail Mount, 24V dc Coil, 2-Pole
- WAGO 788 Series Interface Relay, DIN Rail Mount, 24V dc Coil, SPDT, 16A Load
- WAGO 788 Series Relay Module, DIN Rail Mount, 115V ac Coil, DPDT, 2-Pole, 8A Load
- WAGO 788 Series Relay Module, DIN Rail Mount, 24V ac Coil, DPDT, 2-Pole, 8A Load
- WAGO 788 Series Relay Module, DIN Rail Mount, 230V ac Coil, DPDT, 2-Pole, 8A Load
- WAGO 788 Series Relay Module, DIN Rail Mount, 110V dc Coil, DPDT, 2-Pole, 8A Load