Festo ELGT, 8124452 Electrical Linear Actuator, 0.5m/s, 350 mm

This electrical linear actuator provides precise linear motion control for automation and mechanical systems. Designed for continuous operation in industrial settings, it combines guided carriage movement with selectable motor types to drive repeatable strokes up to a medium travel length. The device is intended for integration where controlled, high-frequency actuation is required within temperature-limited environments.

• 100% duty cycle for continuous operation under load
• Ball bearing guidance reduces friction and improves positional stability
• Maximum speed 0.5m/s enables Rapid cycle response
• Stroke length 350mm permits medium-range linear travel
• IP20 protection suitable for clean, indoor installations
• Compatible with servo and stepper motors for control flexibility

• Suitable for pick-and-place modules in assembly automation
• Ideal for indexing tables requiring frequent linear shifts
• Used for valve actuation in electrical control systems
• Can be used for positioning stages in test and measurement rigs
• Used with robotic end-effectors for linear offset movements

It is rated for continuous use up to a maximum ambient temperature of 50°C, making it suitable for typical production‑floor environments.

A ball bearing guide system provides low‑friction linear guidance, enhancing repeatability and reducing wear on the carriage.

It accepts both servo and stepper drive technologies, allowing either closed‑loop precision or open‑loop stepwise control depending on system needs.

The unit is produced in accordance with recognised standards including RoHS and industry‑specific guidelines for cleanroom and mechanical systems.