대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩62,378.40
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩62,378.40 |
| 5 + | ₩51,342.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 511-9727
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Product Type | Drill Bit | |
| Material | Carbide Tip | |
| Sub Type | SDS-Max | |
| Overall Length | 390mm | |
| Number of Pieces | 1 | |
| Drill Point Diameter | 14mm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Product Type Drill Bit | ||
Material Carbide Tip | ||
Sub Type SDS-Max | ||
Overall Length 390mm | ||
Number of Pieces 1 | ||
Drill Point Diameter 14mm | ||
Standards/Approvals No | ||
제외
RS PRO Carbide-Tipped SDS Drill Bit, 14 mm x 390 mm
Need to drill into hard or abrasive materials like stone and cement? Use this RS PRO Slotted Drive System (SDS) drill bit. It has a carbide tip, which allows for sharp and accurate drilling, even into masonry and concrete.
Carbide tools are highly resistant to abrasion and can withstand very high temperatures. This makes them ideal for drilling through tough materials. The strength and durability of the carbide ensure you'll still end up with a sharp tip on the drill bit, as well as a clean, smooth finish on the cut.
This drill bit has spiral fluting along the lead, resulting in a continuous and efficient drilling motion. The flutes allow any debris to remove itself from the cutting path, so you can drill unimpeded. For a safe and secure fit, use this drill bit with an SDS-MAX fitting shank.
Features and Benefits
• Diameter of 14 mm
• SDS drill bit type
• Not hammer capable
• Carbide-tipped material
• Overall length of 390 mm
• SDS-Max type
관련된 링크들
- RS PRO Carbide Tip 1 SDS-Max 18 mm, 390 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 16 mm, 390 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 12 mm, 390 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 14 mm, 540 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 28 mm, 37 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 30 mm, 37 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 20 mm, 37 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 12 mm, 540 mm Overall