- RS 제품 번호:
- 212-941
- 제조업체:
- RS PRO
현재 시스템 에러로 재고 수량 확인이 불가합니다. krenquiry@rs-components.com 에 문의하시거나 잠시후에 다시 시도해주시기 바랍니다.
추가완료!
단가 1세트
₩164,177.707
Set(s) | Per Set |
1 + | ₩164,177.707 |
- RS 제품 번호:
- 212-941
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- CN
제품 세부 사항
Cased Drill Sets
Straight shank, right-hand cutting drill set to BS328/DIN standards supplied in metal cases, which fan out automatically, when open
RS PRO HSS 25 Piece Drill Bit Set
RS PRO offers this exceptional Drill Bit Set made from HSS for high-performance, offering more resistance than high carbon steel bits. It contains a great selection of the most commonly used diameters from 1mm to 13 mm in 0.5 mm increments. These High-Speed Steel (HSS) are constructed from a single piece of high-speed steel, thus reducing breaking and blunting under heat or stress. Manufactured in accordance with DIN 338 for high precision tolerances and geometric accuracies.
Typical Applications
HSS bits features a partially grounded tip making it suitable for non-ferrous metals, which include aluminium, copper, brass, zinc and iron. It can be used for drilling applications involving plastic, wood and masonry however, the performance is affected.
Features and Benefits
Ground flute for a longer life than equivalent roll forged bits
The shaft is equal to the diameter of the drill for low breakages
Black oxide finish allows for quick removal of material
Cuts faster and lasts longer than regular high carbon steel bits
The shaft is equal to the diameter of the drill for low breakages
Black oxide finish allows for quick removal of material
Cuts faster and lasts longer than regular high carbon steel bits
FAQ's
Q. What does jobber mean?
A. The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.
Q. What is HSS?
A. An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. As a standard drill can spin upwards of around 500 - 700rpm, the friction can cause a substantial build-up of heat. Something which would not be wanted when working with wood and plastic.
Note
25 Piece Drill Bit Set
1 mm to 13 mm in 0.5 mm increments
1 mm to 13 mm in 0.5 mm increments
Standards
DIN 338
사양
속성 | 값 |
---|---|
Set Type | Drill Set |
Drilling Application | Metal |
Drill Bit Type | Twist Drill Bit |
Material | HSS |
Number of Pieces | 25 |
Minimum Size | 1mm |
Maximum Size | 13mm |
Set Contents | HSS Drill Bits |