Adafruit 684, mini color OLED 0.96in OLED Display Breakout Board With microSD holder
- RS 제품 번호:
- 124-5443
- 제조사 부품 번호:
- 684
- 제조업체:
- ADAFRUIT INDUSTRIES
Subtotal (1 unit)*
₩46,285.60
재고있음
- 22 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩46,285.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 124-5443
- 제조사 부품 번호:
- 684
- 제조업체:
- ADAFRUIT INDUSTRIES
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ADAFRUIT INDUSTRIES | |
| Diagonal Display Size | 0.96in | |
| Display Technology | OLED Display | |
| Kit Classification | Breakout Board | |
| Kit Name | mini color OLED | |
| Featured Device | microSD holder | |
| 모두 선택 | ||
|---|---|---|
브랜드 ADAFRUIT INDUSTRIES | ||
Diagonal Display Size 0.96in | ||
Display Technology OLED Display | ||
Kit Classification Breakout Board | ||
Kit Name mini color OLED | ||
Featured Device microSD holder | ||
Adafruit 0.96 inch OLED Screen Breakout Board with microSD Card Holder
A tiny screen yet delivers huge contrast and brightness and is perfect for displaying text or graphics. OLED screens do not need a backlight helping them to be energy efficient. Current draw depends on usage as each OLED LED draws current only when on. The more pixels which are lit, the more current is used.
The screen measure 0.96 inch and has 96 x 64 pixels.
This board uses the SSD1331 driver chip, which manages the display and you interface with it using SPI (clock, data, chip select, data/command and an optional reset pin).
The board and screen are supplied as a fully assembled breakout which includes a small boost converter (required for providing 12 V to the OLED) and a micro-SD card holder. It also has built-in logic level shifting so you can use it with 3 V to 5 V dc power and logic levels.
The screen measure 0.96 inch and has 96 x 64 pixels.
This board uses the SSD1331 driver chip, which manages the display and you interface with it using SPI (clock, data, chip select, data/command and an optional reset pin).
The board and screen are supplied as a fully assembled breakout which includes a small boost converter (required for providing 12 V to the OLED) and a micro-SD card holder. It also has built-in logic level shifting so you can use it with 3 V to 5 V dc power and logic levels.
- 0.96" diagonal OLED
- 16-bit colour
- SPI interface
- 3.3 V to 5 V logic and power
- Micro-USB card holder (card not included)
- PCB size: 31.5 x 35.5 x 5 mm
- Current draw roughly 25 mA but depends on usage
- 16-bit colour
- SPI interface
- 3.3 V to 5 V logic and power
- Micro-USB card holder (card not included)
- PCB size: 31.5 x 35.5 x 5 mm
- Current draw roughly 25 mA but depends on usage
Passive Matrix OLED Displays