Microchip, 16 bit Digital Signal Processor 70 MIPS 256kB FLASH 28-Pin PDIP

RS 제품 번호:: 861-0545P
제조사 부품 번호:: dsPIC33EV256GM102-I/SP
제조업체:: Microchip

Microchip, 16 bit Digital Signal Processor 70 MIPS 256kB FLASH 28-Pin PDIP

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal 4 units (supplied in a tube)*

₩32,568.00

추가로 2026년 10월 12일 부터 106 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
4 - 7	₩8,142.00
8 +	₩7,980.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 861-0545P
제조사 부품 번호:: dsPIC33EV256GM102-I/SP
제조업체:: Microchip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Microchip
	Product Type	Digital Signal Processor
	Maximum Clock Frequency	70MIPS
	Device Million Instructions per Second	70MIPS
	Data Bus Width	16bit
	RAM Size	16kB
	Instruction Set Architecture	Code Efficient
	Program Memory Size	256kB
	Program Memory Type	FLASH
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	3.6V
	Mount Type	Through Hole
	Number of ADCs	1
	Number of PWM Channels	6
	Package Type	PDIP
	Minimum Operating Temperature	-40°C
	Pin Count	28
	Maximum Operating Temperature	85°C
	Height	3.81mm
	Width	7.49mm
	Standards/Approvals	No
	Length	35.56mm
	Timer Resolution	32bit
	ADC Channels	11
	ADC Resolution	19bit
	Number of PWM Units	1
	PWM Resolution	16bit
	Automotive Standard	AEC-Q100
	Number of Timers	7

	모두 선택
	브랜드 Microchip
	Product Type Digital Signal Processor
	Maximum Clock Frequency 70MIPS
	Device Million Instructions per Second 70MIPS
	Data Bus Width 16bit
	RAM Size 16kB
	Instruction Set Architecture Code Efficient
	Program Memory Size 256kB
	Program Memory Type FLASH
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 3.6V
	Mount Type Through Hole
	Number of ADCs 1
	Number of PWM Channels 6
	Package Type PDIP
	Minimum Operating Temperature -40°C
	Pin Count 28
	Maximum Operating Temperature 85°C
	Height 3.81mm
	Width 7.49mm
	Standards/Approvals No
	Length 35.56mm
	Timer Resolution 32bit
	ADC Channels 11
	ADC Resolution 19bit
	Number of PWM Units 1
	PWM Resolution 16bit
	Automotive Standard AEC-Q100
	Number of Timers 7

Datasheet

dsPIC33EVxxxGM00x/10x 16-Bit Digital Signal Controllers

Microchip’s dsPIC33EV family of 16-bit Digital Signal Controllers (DSCs) features a 70 MIPS dsPIC® DSC core with enhanced on-chip features. Capable of operating in harsh environments these devices are suitable for appliance and automotive applications. Rich peripheral integration includes SENT (Single-Edge Nibble Transmission-Transmit/Receive), High Speed PWMs, OP Amps and Error Correcting Code Flash for increased reliability and safety. The performance offered by the dsPIC33EV family of MCUs allows them to be incorporated into the design of high-performance, precision motor control systems that are more energy efficient. They can be used to control BLDC, permanent magnet synchronous, AC induction and stepper motors.

Microcontroller Features

70 MHz Max. CPU Speed

Code-Efficient (C and Assembly) Architecture

16-Bit Wide Data Path

Two 40-Bit Wide Accumulators

Single-Cycle (MAC/MPY) with Dual Data Fetch

Single-Cycle, Mixed-Sign MUL plus Hardware Divide

32-Bit Multiply Support

Intermediate Security for Memory - Provides a Boot Flash Segment in addition to the existing General Flash Segment

Error Code Correction (ECC) for Flash

Added Two Alternate Register Sets for Fast Context Switching

Clock Management Features

Internal, 15% Low-Power RC (LPRC) – 32 kHz

Internal, 1% Fast RC (FRC) – 7.37 MHz

Internal, 10% Backup RC (BFRC) – 7.37 MHz

Programmable PLLs and Oscillator Clock Sources

Fail-Safe Clock Monitor (FSCM)

Additional Fail-Safe Clock Monitor Source (BFRC), Intended to Provide a Clock Fail Switch Source for the System Clock

Independent Watchdog Timer (WDT)

System Windowed Watchdog Timer (DMT)

Fast Wake-Up and Start-Up

Power Management Features

Low-Power Management modes (Sleep, Idle and Doze)

Power Consumption Minimized Executing NOP String

Integrated Power-on Reset (POR) and Brown-out Reset (BOR)

0.5 mA/MHz Dynamic Current (typical)

50 μA at +25°C IPD Current (typical)

Peripheral Features

Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)

Configurable Analogue to Digital Converter (ADC) Module

Up to 4 Operational Amplifiers

Up to 5 Comparators

Charge Time Measurement Unit (CTMU) - Supports mTouch™ capacitive touch sensing

Five 16-bit Timers

Two 32-bit Timers

Four Output Capture modules Configurable as Timers/Counters

Four Input Capture modules

Two Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART)

Two SPI Modules

One I2C Module with SMBus Support