STMicroelectronics B-LCDAD-HDMI1 DSI to HDMI Adapter Board for use with ST Discovery Kits

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩53,561.20

Add to Basket
수량 선택 또는 입력
공급 부족
  • 7 개 단위 배송 준비 완료
당사의 현재 재고는 제한중이며, 제조사측에서는 공급 부족을 예상하고 있습니다.
수량
한팩당
1 - 4₩53,561.20
5 +₩52,489.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
124-1571
제조사 부품 번호:
B-LCDAD-HDMI1
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Product Type

Development Kit Accessory

Accessory Type

DSI to HDMI Adapter Board

For Use With

ST Discovery Kits

Standards/Approvals

HDMI v1.3

The DSI to HDMI adapter board, part number B-LCDAD-HDMI1 is used for STM32 Development Boards or Discovery Boards. It comes with DSI input port and HDMI output port.

What is the benefit of B-LCDAD-HDMI1?


B-LCDAD-HDMI1 includes bridge chip ADV7533, therefore this board can support 2-, 3- or 4-lanes DSI video input data, S/PDIF, 2-channels I2S audio input data and HDMI v1.3 output port.

What is STM32 Development Board?


These boards have been designed for development purposes for the ARM Cortex STM32 MCUs.

STM32 carries external circuity such as transceivers, sensors, memory interfaces, displays and many more and are known as a reference design for application development.

Features of B-LCDAD-HDMI1:


• Up to four lanes of MIPI/DSI data, each running up to 800 Mbps

• 2-channels I2S transmits stereo up to 192 kHz sampling rate

• S/PDIF carries stereo LPCM audio or compressed audio

HDMI output connector:


• Support of video resolutions with pixel clocks up to 80 MHz

• Support of CEC signals, 5 V-tolerant I2C and HPD I/Os

• Common-mode filters with ESD protection

Application:


• Development Design

• Embedded Design

MIPI DSI Interface TFT LCD Board


The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen display board that can be used with a Discovery development kit such as the STM32F769I-DISC1. Two interface adapters are also available.

4in TFT LCD touchscreen display panel

Resolution: 480 x 800 pixels (WVGA)

16.7M display colours

RGB vertical stripe of pixel arrangement

MIPI DSI connector

Up to two lanes of MIPI DSI data

Supports single-point touch and gesture or two-point touch

Power supply: +2.8V to +3.3Vdc for both LCD and touch panel, +5V for backlight

For use with ST Discovery Kits 123-1057, 123-1055

Display Interface Adapters

124-1570 B-LCDAD-RPI1 DSI to Raspberry Pi Connector Adapter Board

124-1571 B-LCDAD-HDMI1 DSI to HDMI Connector Adapter Board

관련된 링크들