Phoenix Contact SUBCON-PLUS F2 9 Way Right Angle D-sub Connector Socket

SUBCON-PLUS 9 position field bus D-sub connectors with two cable entries and a screw terminal block for each cable enabling fieldbus systems to be built with RS-485 interfaces. The terminal blocks can be placed in the upper or lower part of the connector housing allowing cable entry from the left or right. These SUBCON-PLUS field bus RS-485 d-sub connectors have a high transmission speed, a high level of EMC with metallized ABS housings for EMI shielding and accept a cable cross section range of 6 to 10mm²
Stock number 648-3489 is a 9 way d-sub socket with two 35° angled cable entries for Modbus, Modbus-PLUS, BITBUS, ARCNET, MULT/MININET(B&R), SYSTEM 2003 (B&R), P-NET
Stock number 324-9371 is a 9 way d-sub socket with two 35° angled cable entries for SUCONET K1, K2 (EATON/Moeller), S-BUS (Saia) and J-BUS (Merlin Gerin)
Stock number 324-9400 is a 9 way d-sub socket with two 35° angled cable entries for Modbus and CEGELEC
Stock numbers 801-8933 (pin) and 801-8964 (socket) are 9 way d-sub connectors with two 35° angled cable entries for universal assignment.
For short mounting screw see stock number 801-8961
For screwdriver see stock number 390-9663

This 9-pin female D-sub connector is designed for effective fieldbus systems. With a right-angle body orientation, it supports dual cable entries, enhancing connectivity solutions in automation and industrial applications. The dimensions of this product are 16x44x60mm, making it compact and versatile for various installation needs.

• Separate terminal blocks simplify wiring for dual cables
• Easy assembly with knurled screws improves user convenience
• Shielded design protects against EMC interference
• Flexible cable entry accommodates site-specific installation
• High transmission speed allows for dependable data transfer
• Reversible connection block permits orientation adjustments

• Utilised in CAN bus and SUCONET K1 systems
• Suitable for connections to screw terminal blocks
• Integrated into S-BUS and J-BUS systems
• Ideal for environments that require compact connector solutions

No, use in explosive areas is not permitted.

Yes, it supports rigid and flexible conductor cross sections.

No, it should only be used in environments with an IP20 rating.

Yes, it allows selection between right or left cable entry.

Yes, it operates at a nominal voltage of 50V DC.

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief