제조사부품번호

CK ESD Safe 1.30 mm Full Flush Side cutter

RS 제품 번호:: 910-7157
Distrelec 제품 번호:: 300-12-751
제조사 부품 번호:: T3883
제조업체:: CK

CK ESD Safe 1.30 mm Full Flush Side cutter

모든 Cutters 열람하기

Subtotal (1 unit)*

₩29,660.00

재고있음

175 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩29,660.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 910-7157
Distrelec 제품 번호:: 300-12-751
제조사 부품 번호:: T3883
제조업체:: CK

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	CK
	Product Type	Side cutter
	Sub Type	Side Cutter
	Jaw Width	2mm
	Overall Length	132mm
	Jaw Length	8mm
	Application	ESD Electronic Pliers and Cutter
	Jaw Material	Special Tool Steel Blade
	ESD Safe	Yes
	Grip Material	2 Component
	Handle Material	Dual Component
	Standards/Approvals	No
	Maximum Cutting Capacity	1.30mm
	Cut Type	Full Flush

	모두 선택
	브랜드 CK
	Product Type Side cutter
	Sub Type Side Cutter
	Jaw Width 2mm
	Overall Length 132mm
	Jaw Length 8mm
	Application ESD Electronic Pliers and Cutter
	Jaw Material Special Tool Steel Blade
	ESD Safe Yes
	Grip Material 2 Component
	Handle Material Dual Component
	Standards/Approvals No
	Maximum Cutting Capacity 1.30mm
	Cut Type Full Flush

Datasheet

제외

COO (Country of Origin):: TW

CK Ecotronic ESD Side Cutters (Micro), 132mm Overall Length, 1.3mm Maximum Cutting Capacity - T3883

This side cutter is an electrostatic-discharge-safe tool designed for precision work on sensitive electronic components. It combines a narrow cutting profile with a protective grip system to support routine trimming and wire removal tasks in electronics assembly and repair environments.

Features and Benefits:

• 8mm jaw length delivers access to confined component areas
• 2mm jaw width enables precise clearance in dense layouts
• Full flush cutting reduces protruding leads for neat finishes
• Special tool steel blade maintains Sharp cutting performance
• Dual-component handle provides controlled grip for repeatable cuts

Applications

• Suitable for trimming component leads during board assembly
• Ideal for finalising soldered connections in repair work
• Used with fine wiring in electronic prototypes and modules
• Can be used for removing excess wire after crimping

Is the tool safe for use around sensitive assemblies?

Yes, it is ESD safe, designed to dissipate static during handling.

What grip characteristics assist prolonged use?

The handle employs dual-component construction with a two-component grip for enhanced comfort and reduced slippage.

What cutting capacity should I expect for common wires?

It supports cutting up to 1.3mm thickness for typical electronic conductor sizes.

How is the cutting edge suited to tight spaces?

The blade has a narrow 2mm jaw width and 8mm jaw length, facilitating access between close-packed parts.