제조사부품번호

CK ESD Safe 20 mm Full Flush Side cutter

RS 제품 번호:: 132-0976
제조사 부품 번호:: T3781DEF115
제조업체:: CK

CK ESD Safe 20 mm Full Flush Side cutter

모든 Cutters 열람하기

Subtotal (1 unit)*

₩115,440.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩115,440.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 132-0976
제조사 부품 번호:: T3781DEF115
제조업체:: CK

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	CK
	Product Type	Side cutter
	Sub Type	Side Cutter
	Jaw Width	7.50mm
	Overall Length	125mm
	Jaw Length	13mm
	Application	ESD Electronic Pliers and Cutter
	Jaw Material	Special Alloy Steel
	ESD Safe	Yes
	Grip Material	2 Component
	Handle Material	Dual Component
	Maximum Cutting Capacity	20mm
	Standards/Approvals	DIN EN 61340 5.1 & 5.2
	Cut Type	Full Flush

	모두 선택
	브랜드 CK
	Product Type Side cutter
	Sub Type Side Cutter
	Jaw Width 7.50mm
	Overall Length 125mm
	Jaw Length 13mm
	Application ESD Electronic Pliers and Cutter
	Jaw Material Special Alloy Steel
	ESD Safe Yes
	Grip Material 2 Component
	Handle Material Dual Component
	Maximum Cutting Capacity 20mm
	Standards/Approvals DIN EN 61340 5.1 & 5.2
	Cut Type Full Flush

Datasheet

제외

COO (Country of Origin):: DE

CK ESD Bevel Side Cutter, 20mm Maximum Cutting Capacity, 125mm Length - T3781DEF115

This side cutter is an electrostatic-discharge‑safe tool designed for precision work on sensitive electronic assemblies. It combines an anti‑static construction with a flush‑cut geometry to remove components and trim leads while minimising the risk of ESD damage. The tool is intended for controlled environments where static‑safe handling is required.

Features and Benefits:

• Full flush cutting maintains near‑surface trim for neat finishes
• Special alloy steel jaws deliver Durable cutting edges
• 75 mm jaw width enables close access to confined areas
• Dual‑component handles reduce slippage during repetitive work
• ESD protection conforms to DIN EN 61340 5.1 & 5.2 standards

Applications

• Suitable for trimming component leads on populated boards
• Ideal for use in static‑controlled assembly benches
• Used with delicate electronic modules requiring ESD precautions
• Can be used for precision cable and wire end trimming
• Suitable for rework stations handling small SMD components

What jaw geometry allows near‑surface cuts?

The tool uses a full flush‑cut profile that leaves minimal protrusion after trimming.

How does the handle construction assist grip control?

The handles use a dual‑component material to combine firmness with a softer overmould for improved hand contact.

What certification ensures suitability in ESD environments?

Compliance with DIN EN 61340 5.1 & 5.2 indicates the tool meets requirements for electrostatic control.

What limits the cutting capability for thicker materials?

The cutter’s rated maximum cutting capacity is 20 mm, which defines its effective material thickness range.

What jaw dimensions support fine work in tight spaces?

The jaws measure 13 mm in length with a 7.5 mm width to permit precise access in confined areas.