Subtotal (1 unit)*
₩497,440.00
일시적 품절
- 2026년 10월 05일 부터 3 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩497,440.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-0752
- 제조사 부품 번호:
- 576TX1
- 제조업체:
- Erem
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Erem | |
| Product Type | Side cutter | |
| Overall Length | 115mm | |
| Jaw Length | 18mm | |
| VDE/1000V Approved | No | |
| Application | Medical Technology | |
| Height Safe | Yes | |
| Jaw Material | High Grade Tool Steel | |
| ESD Safe | Yes | |
| Material Cut | Copper | |
| Standards/Approvals | Swiss Made | |
| Maximum Cutting Capacity | 1.2mm | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Erem | ||
Product Type Side cutter | ||
Overall Length 115mm | ||
Jaw Length 18mm | ||
VDE/1000V Approved No | ||
Application Medical Technology | ||
Height Safe Yes | ||
Jaw Material High Grade Tool Steel | ||
ESD Safe Yes | ||
Material Cut Copper | ||
Standards/Approvals Swiss Made | ||
Maximum Cutting Capacity 1.2mm | ||
Cut Type Flush | ||
Weller Side cutter, 1.2mm Maximum Cutting Capacity, 115mm Overall Length - 576TX1
This side cutter is a precision tool designed for cleanly trimming copper conductors in controlled environments. It is intended for users working in electronics, automation, electrical and mechanical sectors where electrostatic discharge control and precise, flush cuts are required. The tool's configuration supports delicate handling and fine work typical of medical-technology settings.
Features and Benefits:
• ESD-safe construction reduces electrostatic risk during sensitive tasks
• Flush-cutting geometry delivers low-profile conductor ends
• High-grade tool steel jaws provide sustained cutting performance
• Maximum cutting capacity 1.2mm enables work on small solid conductors
• Height-safe design permits use on elevated platforms or ladders
• Flush-cutting geometry delivers low-profile conductor ends
• High-grade tool steel jaws provide sustained cutting performance
• Maximum cutting capacity 1.2mm enables work on small solid conductors
• Height-safe design permits use on elevated platforms or ladders
Applications
• Suitable for trimming copper wire in assembly of electronic modules
• Ideal for use in medical-technology component preparation
• Used with delicate automation sensor wiring and harnesses
• Can be used for maintenance tasks in electrical control cabinets
• Ideal for use in medical-technology component preparation
• Used with delicate automation sensor wiring and harnesses
• Can be used for maintenance tasks in electrical control cabinets
Is this tool insulated for work on live circuits up to 1000 V?
No, the item is not approved for 1000V work and should not be used as an insulated live-line tool.
What is the effective cutting zone available for precise work?
The cutting edge extends along an 18mm jaw length, allowing fine positioning of conductor ends.
How long is the tool for grip and reach considerations?
The overall length is 115 mm, providing a Compact balance between control and reach.
Where was the tool manufactured and what does that imply about production standards?
It is produced in Switzerland, reflecting manufacture under Swiss standards.
Can it handle non-copper materials or thicker conductors?
It is specified for cutting copper up to 1.2 mm
suitability for other materials or larger diameters is not indicated.
관련된 링크들
- Erem 2476 ESD Flush ESD Safe Side Cutter
- Erem 622 ESD ESD Safe Flush Side cutter
- Erem 2476 ESD ESD Safe Flush Side cutter
- Erem Flush ESD Safe Side cutter
- Erem 676 ESD Flush ESD Safe Side Cutter
- Erem 577 ESD ESD Safe Flush Side cutter
- Erem 522 ESD ESD Safe Flush Side cutter
- Erem 2477 ESD Flush ESD Safe Side Cutter