Subtotal (1 unit)*
₩462,780.00
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩462,780.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-0718
- 제조사 부품 번호:
- 2476TX1W
- 제조업체:
- Erem
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Erem | |
| Product Type | Side cutter | |
| Sub Type | Wire Cutter | |
| Overall Length | 128mm | |
| Jaw Length | 18.5mm | |
| VDE/1000V Approved | No | |
| Height Safe | Yes | |
| Application | Microelectronic | |
| ESD Safe | Yes | |
| Jaw Material | Special Steel | |
| Handle Material | Ergonomic | |
| Material Cut | Medium Hardness, Copper Wire, Hard Wire | |
| Standards/Approvals | RoHS | |
| Maximum Cutting Capacity | 0.99mm | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Erem | ||
Product Type Side cutter | ||
Sub Type Wire Cutter | ||
Overall Length 128mm | ||
Jaw Length 18.5mm | ||
VDE/1000V Approved No | ||
Height Safe Yes | ||
Application Microelectronic | ||
ESD Safe Yes | ||
Jaw Material Special Steel | ||
Handle Material Ergonomic | ||
Material Cut Medium Hardness, Copper Wire, Hard Wire | ||
Standards/Approvals RoHS | ||
Maximum Cutting Capacity 0.99mm | ||
Cut Type Flush | ||
Weller Side cutter, 128mm Overall Length, 0.99mm Maximum Cutting Capacity - 2476TX1W
This side cutter is a purpose-built hand tool for precision work in microelectronic environments, designed to perform controlled flush cuts on a variety of conductive wires while maintaining electrostatic discharge (ESD) safety.
Features and Benefits:
• ESD-safe construction reduces risk of static-induced component damage
• Flush-cut jaw profile delivers neat residual wire length
• Special steel cutting edges resist wear when cutting hard wire
• 0.99mm maximum cutting capacity handles fine copper conductors
• 18.5mm jaw length enables access in confined component areas
• Ergonomic handle reduces operator fatigue during repetitive use
• Flush-cut jaw profile delivers neat residual wire length
• Special steel cutting edges resist wear when cutting hard wire
• 0.99mm maximum cutting capacity handles fine copper conductors
• 18.5mm jaw length enables access in confined component areas
• Ergonomic handle reduces operator fatigue during repetitive use
Applications
• Suitable for trimming component leads on delicate assemblies
• Ideal for cutting copper wires in harness and Terminal work
• Used for precision cable trimming in automation equipment
• Can be used for maintenance tasks in electrical and mechanical workshops
• Used with microelectronic repair and prototyping operations
• Ideal for cutting copper wires in harness and Terminal work
• Used for precision cable trimming in automation equipment
• Can be used for maintenance tasks in electrical and mechanical workshops
• Used with microelectronic repair and prototyping operations
Is the tool rated for live-voltage work?
No, it is not approved for 1000V live-voltage applications and should not be used for live electrical isolation.
What material types can it cut reliably?
It is designed to cut medium-hardness materials, including copper and harder solid wires, up to the specified diameter.
How does the handle design affect repeated use?
The ergonomic handle is shaped to improve grip comfort and reduce strain during frequent cutting cycles typical in production or repair tasks.
Does it meet environmental or safety standards for electronics manufacturing?
It conforms to RoHS requirements relevant to materials used in Electronic Assembly environments.
관련된 링크들
- Erem 2476 ESD Flush ESD Safe Side Cutter
- Erem 2476 ESD ESD Safe Flush Side cutter
- Erem 622 ESD ESD Safe Flush Side cutter
- Erem 576 ESD ESD Safe Flush Side cutter
- Erem Flush ESD Safe Side cutter
- Erem 676 ESD Flush ESD Safe Side Cutter
- Erem 577 ESD ESD Safe Flush Side cutter
- Erem 522 ESD ESD Safe Flush Side cutter