Subtotal (1 unit)*
₩99,865.60
재고있음
- 추가로 2026년 1월 26일 부터 31 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩99,865.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 187-8270
- 제조사 부품 번호:
- 64 12 115
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Model Number | Knipex | |
| Cutter Type | Front Cutter | |
| Materials Cut | Copper Wire, Soft Wire | |
| Non Sparking | No | |
| Overall Length | 115 mm | |
| Jaw Length | 6mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | No | |
| Material | Special Quality Tool Steel | |
| Maximum Cutting Capacity | 1.4mm | |
| Cutting Capacity Soft Steel Wire | 0.8mm | |
| Cutting Capacity Stranded Wire | 0.8mm | |
| Cut Type | Without Bevel | |
| Cutting Capacity Medium Hard Wire | 0.8mm | |
| Cutting Capacity Soft Wire | 1.4mm | |
| Cutting Capacity Copper Wire | 1.4mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Model Number Knipex | ||
Cutter Type Front Cutter | ||
Materials Cut Copper Wire, Soft Wire | ||
Non Sparking No | ||
Overall Length 115 mm | ||
Jaw Length 6mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe No | ||
Material Special Quality Tool Steel | ||
Maximum Cutting Capacity 1.4mm | ||
Cutting Capacity Soft Steel Wire 0.8mm | ||
Cutting Capacity Stranded Wire 0.8mm | ||
Cut Type Without Bevel | ||
Cutting Capacity Medium Hard Wire 0.8mm | ||
Cutting Capacity Soft Wire 1.4mm | ||
Cutting Capacity Copper Wire 1.4mm | ||
제외
- COO (Country of Origin):
- DE
Electronic front cutter without bevel 115mm
Features / Benefits :
Precision interlocking hinge
Low-friction double spring for smooth and even opening of the clamp
Polishing or mirror polishing (only finish 2) in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
Front cutting pliers, with small bevel
Low-friction double spring for smooth and even opening of the clamp
Polishing or mirror polishing (only finish 2) in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
Front cutting pliers, with small bevel
Special quality tool steel, forged, oil-hardened.