Knipex 64 52 Front Cutter
- RS 제품 번호:
- 288-875
- Distrelec 제품 번호:
- 304-21-771
- 제조사 부품 번호:
- 64 52 115 RS
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩122,256.40
재고있음
- 14 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩122,256.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 288-875
- Distrelec 제품 번호:
- 304-21-771
- 제조사 부품 번호:
- 64 52 115 RS
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Model Number | 64 52 | |
| Cutter Type | Front Cutter | |
| Materials Cut | Copper Wire, Soft Wire | |
| Non Sparking | No | |
| Overall Length | 115 mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | No | |
| Material | Chrome-Plated Steel with Ball Bearings | |
| Maximum Cutting Capacity | 1.3mm | |
| Cutting Capacity Copper Wire | 1.3mm | |
| Cutting Capacity Soft Wire | 1.3mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Model Number 64 52 | ||
Cutter Type Front Cutter | ||
Materials Cut Copper Wire, Soft Wire | ||
Non Sparking No | ||
Overall Length 115 mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe No | ||
Material Chrome-Plated Steel with Ball Bearings | ||
Maximum Cutting Capacity 1.3mm | ||
Cutting Capacity Copper Wire 1.3mm | ||
Cutting Capacity Soft Wire 1.3mm | ||
비준수
- COO (Country of Origin):
- DE
Electronic front cutting pliers without bevel 115mm
Precision pliers for very delicate cutting work, e.g. in the field of electronics and precision mechanics
Features / Benefits :
Precision interlocking hinge
Low-friction double spring for smooth and even opening of the clamp
Polishing or mirror polishing in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles Cutting edges additionally laser-hardened to a hardness of at least 56 HRC
Front and side cutters, short head, without bevel, for flush cutting, α=27°.
Low-friction double spring for smooth and even opening of the clamp
Polishing or mirror polishing in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles Cutting edges additionally laser-hardened to a hardness of at least 56 HRC
Front and side cutters, short head, without bevel, for flush cutting, α=27°.
Special quality tool steel, forged, oil-hardened.