Knipex Knipex 3.8 mm Flush Side cutter
- RS 제품 번호:
- 600-7669
- Distrelec 제품 번호:
- 180-40-643
- 제조사 부품 번호:
- 74 12 180
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩85,260.00
재고있음
- 33 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩85,260.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 600-7669
- Distrelec 제품 번호:
- 180-40-643
- 제조사 부품 번호:
- 74 12 180
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Overall Length | 180mm | |
| Jaw Width | 11mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Application | Electronic | |
| Height Safe | No | |
| Jaw Material | Chrome Vanadium Electric Steel | |
| ESD Safe | No | |
| Handle Material | Bi-Metal | |
| Grip Material | Plastic | |
| Standards/Approvals | DIN ISO 5749 | |
| Maximum Cutting Capacity | 3.8mm | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Overall Length 180mm | ||
Jaw Width 11mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Application Electronic | ||
Height Safe No | ||
Jaw Material Chrome Vanadium Electric Steel | ||
ESD Safe No | ||
Handle Material Bi-Metal | ||
Grip Material Plastic | ||
Standards/Approvals DIN ISO 5749 | ||
Maximum Cutting Capacity 3.8mm | ||
Cut Type Flush | ||
비준수
- COO (Country of Origin):
- DE
KNIPEX 74 12 180 High Leverage Diagonal Cutter with comfort handles black atramentized 180 mm
74 12 180 High Leverage Diagonal Cutter For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges also induction-hardened (hardness approx. 64 HRC), for all wire types including piano wire. With comfort handles MADE of three ergonomic components for optimised handling and with two KNIPEXtend interfaces for extensions. with opening spring
to be activated if required. - Cutting capacities medium hard wire (diameter): Ø 3.8mm- Cutting capacities hard wire (diameter): Ø 2.7mm- Cutting capacities piano wire (diameter): Ø 2.2mm
Features and Benefits
With Comfort Handles Made Of Three Ergonomic Components For Optimised Handling And With Two Knipextend Interfaces For Extensions
Technical attributes
For Very Tough, Continuous Use
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
Standards
Standards: DIN ISO 5749
관련된 링크들
- Knipex Knipex 3.8 mm Small Bevel Side cutter
- Knipex Knipex 3.8 mm With Bevel Side cutter
- Knipex Knipex With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.8 mm With Bevel Side cutter
- Knipex Knipex 3.4 mm With Bevel Side cutter
- Knipex Knipex 4 mm Diagonal Cutter Side cutter
- Knipex Knipex 3.1 mm Without Bevel Side cutter
- Knipex Knipex 3.1 mm With Bevel Side cutter
