제조사부품번호

Stanley STHT0-75067 End Cut Diagonal Cutting Plier

RS 제품 번호:: 555-595
제조사 부품 번호:: STHT0-75067
제조업체:: Stanley

Stanley STHT0-75067 End Cut Diagonal Cutting Plier

Subtotal (1 unit)*

₩32,800.00

13 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩32,800.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 555-595
제조사 부품 번호:: STHT0-75067
제조업체:: Stanley

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Stanley
	Product Type	Diagonal Cutting Plier
	Sub Type	End Cutting Plier
	Non-Sparking	No
	Overall Length	150mm
	Jaw Material	Bi-Material
	Grip Material	Bi-Material
	Handle Material	Bi-Material
	Standards/Approvals	ASME B107.500
	Cut Type	End Cut

	모두 선택
	브랜드 Stanley
	Product Type Diagonal Cutting Plier
	Sub Type End Cutting Plier
	Non-Sparking No
	Overall Length 150mm
	Jaw Material Bi-Material
	Grip Material Bi-Material
	Handle Material Bi-Material
	Standards/Approvals ASME B107.500
	Cut Type End Cut

Datasheet - STHT0-75067

COO (Country of Origin):: CN

Stanley Diagonal Cutting Plier, 150mm Overall Length, End Cut - STHT0-75067

This diagonal cutting plier is designed for precise end-cutting tasks in tight workspaces. It provides controlled trimming of wires and small components and is intended for professional applications where compact, accurate cuts are required. The tool combines a defined cut type with ergonomic contact surfaces to support repeated use in technical environments.

Features and Benefits:

• ASME B107.500 conformity enabling standardised tool handling
• Bi-material grip reducing hand fatigue during repetitive cuts
• Bi-material handle offering improved slip resistance under load
• Bi-material jaw construction delivering wear resistance and consistent cutting
• End-cut geometry permitting close, flush wire trimming

Applications

• Suitable for electronics wiring and small component trimming
• Ideal for precision cable preparation and termination work
• Used with control panels for maintenance and modification tasks
• Can be used for trimming component leads on assembly benches
• Used for on-site electrical servicing in confined spaces

What size is the tool and how does that affect access?

The overall length is 150mm which allows access into confined assemblies and tight cable runs.

Which cut orientation does the tool use for trimming?

It employs an end-cut configuration designed for flush removal of wire and lead material.

What materials are used on contact surfaces to improve handling?

Grip, handle and jaw components all use bi-material construction to balance comfort and control.

Which standard governs the tool’s specification?

The tool is specified to meet ASME B107.500 guidelines, covering dimensional and functional requirements.