제조사부품번호

Stanley FMHT0-71851 Diagonal Cutting Plier

RS 제품 번호:: 555-772
제조사 부품 번호:: FMHT0-71851
제조업체:: Stanley

Stanley FMHT0-71851 Diagonal Cutting Plier

Subtotal (1 unit)*

₩52,400.00

추가로 2026년 11월 16일 부터 2 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩52,400.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 555-772
제조사 부품 번호:: FMHT0-71851
제조업체:: Stanley

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Stanley
	Product Type	Diagonal Cutting Plier
	Sub Type	Gripping Pliers
	Non-Sparking	No
	Overall Length	200mm
	Jaw Length	8in
	Jaw Material	Carbon Steel
	Handle Material	Bi-Material
	Grip Material	Bi-Material
	Standards/Approvals	ANSI

	모두 선택
	브랜드 Stanley
	Product Type Diagonal Cutting Plier
	Sub Type Gripping Pliers
	Non-Sparking No
	Overall Length 200mm
	Jaw Length 8in
	Jaw Material Carbon Steel
	Handle Material Bi-Material
	Grip Material Bi-Material
	Standards/Approvals ANSI

Datasheet - FMHT0-71851

COO (Country of Origin):: CN

Stanley Diagonal Cutting Plier, 8in Jaw Length, 200mm Overall Length - FMHT0-71851

This diagonal cutting plier is designed for precision wire cutting and general trimming tasks in workshop and industrial settings. It combines a carbon steel jaw for cutting performance with a bi-material handle to aid control during repetitive use. The tool meets ANSI standards for dimensional and safety conformity and is suited to environments where accurate, clean cuts are required.

Features and Benefits:

• Carbon steel jaws provide consistent cutting performance and edge retention
• Bi-material grip reduces hand fatigue during repetitive use
• ANSI conformity ensures predictable dimensions and fitment across tooling
• 8in jaw length offers extended reach for confined spaces
• Bi-material handle improves control when manipulating small components

Applications

• Suitable for cutting insulated and non-insulated wires
• Ideal for electrical maintenance and repair tasks
• Used for trimming component leads on assemblies
• Can be used for general-purpose workshop cable cutting
• Suitable for use in panel fitting and light fabrication

What material composes the cutting edges and how does it affect wear?

The cutting edges are MADE from carbon steel which provides hardness that helps maintain edge sharpness under regular use.

How does the handle construction influence operator handling?

The handles use a bi-material construction to combine a firmer core with a softer outer surface for improved grip and reduced slippage.

Is this tool suitable for intrinsically safe or spark-sensitive environments?

It is not non-sparking, so it should not be relied upon in atmospheres requiring spark-resistant tools.

What dimensional standards govern its design and interchangeability?

The tool is produced to ANSI standards, which govern key dimensions and tolerances for hand tools.