NCS199A3RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- RS 제품 번호:
- 185-8847
- 제조사 부품 번호:
- NCS199A3RSQT2G
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩4,925.60
재고있음
- 3,640 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 740 | ₩492.56 | ₩4,925.60 |
| 750 - 1490 | ₩479.40 | ₩4,794.00 |
| 1500 + | ₩473.76 | ₩4,737.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 185-8847
- 제조사 부품 번호:
- NCS199A3RSQT2G
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Product Type | Current Sensing Amplifier | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 26V | |
| Minimum Supply Voltage | 2.2V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 60μA | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| GBP - Gain Bandwidth Product | 40kHz | |
| Height | 1mm | |
| Series | NCS199 | |
| Standards/Approvals | No | |
| Length | 2.2mm | |
| Width | 1.35 mm | |
| Maximum Operating Temperature | 125°C | |
| Output Type | Rail to Rail | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Product Type Current Sensing Amplifier | ||
Power Supply Type Single | ||
Maximum Supply Voltage 26V | ||
Minimum Supply Voltage 2.2V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 60μA | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
GBP - Gain Bandwidth Product 40kHz | ||
Height 1mm | ||
Series NCS199 | ||
Standards/Approvals No | ||
Length 2.2mm | ||
Width 1.35 mm | ||
Maximum Operating Temperature 125°C | ||
Output Type Rail to Rail | ||
Automotive Standard No | ||
- COO (Country of Origin):
- MY
The NCS199A3R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with maximum voltage drop as low as 10 mV full-scale. These devices can operate from a single +2.2 V to +26V power supply, drawing a maximum of 80μA of supply current, and are specified over the extended operating temperature range (-40°C to +125°C). Available in the SC70-6 package.
Wide common mode input range -0.3 V to 26 V
Low offset voltage ± 150 μV Max
Low Offset Drift: 0.5 μV/°C
Supply voltage range from 2.2 V to 26 V
High-Side Current Sensing for High Voltage Systems
Low Ohm value Current Sense Resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibility
Current Sensing (High-Side/Low-Side)
Applications
Power Monitoring
Power Adapters
Feedback Control Loops
End Products
Fast Chargers - Smartphones
Telecom DC-DC Modules
E-Cigarettes
High End Computing/Servers
Wireless Charging
관련된 링크들
- NCS199A3RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS199A1RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS199A2RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS213RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS210RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS214RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCV210RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCV214RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70