onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- RS 제품 번호:
- 178-4384
- 제조사 부품 번호:
- NCS199A1RSQT2G
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 reel of 3000 units)*
₩975,720.00
일시적 품절
- 2026년 5월 28일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 릴당* |
|---|---|---|
| 3000 - 3000 | ₩325.24 | ₩974,592.00 |
| 6000 - 9000 | ₩317.72 | ₩954,852.00 |
| 12000 + | ₩312.08 | ₩936,240.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 178-4384
- 제조사 부품 번호:
- NCS199A1RSQT2G
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Product Type | Current Sensing Amplifier | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 26V | |
| Minimum Supply Voltage | 2.2V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 80μA | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| GBP - Gain Bandwidth Product | 90kHz | |
| Height | 1mm | |
| Length | 2.2mm | |
| Width | 1.35 mm | |
| Standards/Approvals | No | |
| Series | NCS199 | |
| Maximum Operating Temperature | 125°C | |
| Output Type | Rail to Rail | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Product Type Current Sensing Amplifier | ||
Power Supply Type Single | ||
Maximum Supply Voltage 26V | ||
Minimum Supply Voltage 2.2V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 80μA | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
GBP - Gain Bandwidth Product 90kHz | ||
Height 1mm | ||
Length 2.2mm | ||
Width 1.35 mm | ||
Standards/Approvals No | ||
Series NCS199 | ||
Maximum Operating Temperature 125°C | ||
Output Type Rail to Rail | ||
Automotive Standard No | ||
- COO (Country of Origin):
- MY
The NCS199A1R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with maximum voltage drop as low as 10 mV full-scale.
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty
관련된 링크들
- NCS199A3RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS199A1RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS199A2RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS213RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS210RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCS214RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCV210RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- NCV214RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70