Souriau Sunbank by Eaton TRIM TRIO Crimp Tool Frame Crimping Tool Frame for Crimp Contact

모든 Crimp Tools 열람하기

Subtotal (1 unit)*

₩210,315.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 15 개 단위 배송 준비 완료
  • 추가로 2026년 3월 24일 부터 16 개 단위 배송
  • 추가로 2026년 4월 07일 부터 16 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩210,315.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
787-9588
Distrelec 제품 번호:
180-44-777
제조사 부품 번호:
SHANDLES
제조업체:
Souriau Sunbank by Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Souriau Sunbank by Eaton

Sub Type

Crimping Tool Frame

Product Type

Crimp Tool Frame

For Use With

Crimp Contact

Series

TRIM TRIO

Standards/Approvals

RoHS

COO (Country of Origin):
DE

Souriau Trim Trio Crimp Contact Tooling Dies and Crimp Tool Handle


The Souriau Shandles Crimping Tool + Crimping Heads are equipment designed with a professional use in mind. Manufactured from high-quality materials that guarantee durability and long life operation. The Shandles Crimp Tool (787-9588) is a crimp tool without a die and can be used with Souriau Trim Trio contacts, including MSM-MSG -MB rectangular connectors, SMS Qikmate connectors, UTO - UTS - UTL - UTG and UTP - MBG circular connectors.

TRIM TRIO dies compatible with a crimp tool handles are:

• Souriau UTS Series, Crimping Head, Wire size 16 -14 AWG, Hex size 1.6mm (787-9557)

• Souriau UTS Series, Crimping Head, Wire size 16 -14 AWG, Hex size 1.6mm (787-9563)

• Souriau UTS Series, Crimping Head, #16 RM RC Contact (787-9566)

• Souriau UTS Series, Crimping Head, Wire size 26 - 20 AWG, Hex size 1.6mm (787-9569)

• Souriau UTS Series, Crimping Head, Wire size 18 -16 AWG, Hex size 1.6mm (787-9572)

• Souriau UTS Series, Crimping Head, Wire size 26 -18 AWG, Hex size 1.6mm (787-9575)

• Souriau UTS Series, Crimping Head, Wire size 26 - 20 AWG, Hex size 1.6mm (787-9759)

• Souriau Crimping Head, Wire size 30 - 20 AWG (851-0075)

• Souriau Crimping Head, Wire size 16 - 14 AWG (851-0079)

Features and Benefits:

• Made from highly durable materials

• The guaranteed endurance of 5000 cycles

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ’s:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Souriau UTS


관련된 링크들