Daniels Manufacturing M22520/7-01 Crimp Tool Frame Crimping Tool Frame for Crimp Contact

모든 Crimp Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩1,551,282.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 5 개 단위 배송 준비 완료
  • 추가로 2026년 2월 19일 부터 13 개 단위 배송
  • 추가로 2026년 3월 05일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩1,551,282.00
5 +₩1,396,144.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
314-8408
제조사 부품 번호:
MH860
제조업체:
Daniels Manufacturing
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Daniels Manufacturing

Sub Type

Crimping Tool Frame

Product Type

Crimp Tool Frame

For Use With

Crimp Contact

Series

M22520/7-01

Overall Length

190.5mm

Standards/Approvals

No

제외

COO (Country of Origin):
US

Manufacturer's Warranty


DMC MH860 Miniature Adjustable Crimp Tool


A quality hand crimping tool for crimping circular connector contacts male and female. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps. An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits


• Lightweight

• Wire size: 16mm2 to 22 mm2 / 16-28 AWG

• 8-step selector knob for crimp depth selection

• Dual ratchet mechanism ensures that a full crimp cycle is achieved

• Minimum maintenance required

• Qualified to MIL-DTL-22520/7 and AS22520/7

Positioner


A positioner is not supplied with the tool and must be purchased separately.

Typical Applications:


• Maintenance & repair

• Electrical Installations

• Computer Interfacing

• Cable assemblies

FAQ:

How easy are they to use?

They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?

• There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

관련된 링크들