제조사부품번호

RS PRO Crimp Tool for Insulated Terminals Red, Yellow, Blue

RS 제품 번호:: 533-279
Distrelec 제품 번호:: 304-04-325
제조업체:: RS PRO

RS PRO Crimp Tool for Insulated Terminals Red, Yellow, Blue

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩209,300.00

24 개 단위 배송 준비 완료
추가로 다른 지역에서 585 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩209,300.00
5 - 24	₩172,240.00
25 +	₩155,060.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 533-279
Distrelec 제품 번호:: 304-04-325
제조업체:: RS PRO

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	RS PRO
	Product Type	Crimp Tool
	For Use With	Insulated Terminals Red, Yellow, Blue
	Minimum Wire Size mm²	0.75mm²
	Maximum Wire Size AWG	10AWG
	Minimum Wire Size AWG	22AWG
	Maximum Wire Size mm²	6mm²
	Height Safe	No
	Overall Length	225mm

	모두 선택
	브랜드 RS PRO
	Product Type Crimp Tool
	For Use With Insulated Terminals Red, Yellow, Blue
	Minimum Wire Size mm² 0.75mm²
	Maximum Wire Size AWG 10AWG
	Minimum Wire Size AWG 22AWG
	Maximum Wire Size mm² 6mm²
	Height Safe No
	Overall Length 225mm

COO (Country of Origin):: SE

RS Pro Crimp Tool For 6.0 mm² to 0.75 mm² Insulated Terminals

The 533-279 is an “Original line” hand crimp tool for insulated terminals in the range from 6.0 mm² to 0.75 mm²/AWG 22 to AWG10. The tool is designed to provide consistent and reliable crimp connections on end splices/ferrules wires.

Also known as Red, Blue and Yellow terminals. See stock numbers 534-238, 534-597, 534-468 typically. Symmetrical oval crimps are produced for the insulation and conductor barrel, either right or left handed.

Features and Benefits

• Versatile and easy to use for right hand or left hand users

• Non-slip main handle and low friction moving handle ensue a comfortable hand grip

• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

• Full cycle crimp mechanism to ensure consistent, reliable crimp

• Ratchet release mechanism to clear mis-crimps and obstructions

• Precision eccentric adjustment for consistent performance and ability to calibrate

• Each tool has a unique serial number for traceability

• Durable: life span exceeds 50000 cycles

• High strength, through hardened alloy Swedish steel construction

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly

*Use a light mineral-free oil

Typical applications

• Maintenance & repair

How to use?

Open the tool. Insert terminal and wire in die nest from front. Close tool until ratchet release. Attention: To release ratchet mechanism, push the trigger forward when holding handles.

Note

Risk of electric shock. Do not use this tool on live wire.