Bel-Stewart Voice Crimp Tool Punch Down Tool for SS-39200-0xx plugs

모든 Crimp Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩954,946.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
  • 추가로 2026년 2월 25일 부터 3 개 단위 배송
  • 추가로 2026년 3월 11일 부터 3 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩954,946.00
5 +₩935,845.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
413-415
제조사 부품 번호:
2980075-01
제조업체:
Bel-Stewart
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Bel-Stewart

Sub Type

Punch Down Tool

Product Type

Crimp Tool

For Use With

SS-39200-0xx plugs

Series

Voice

Standards/Approvals

RoHS

Cat 6 Shielded Termination Tool Kit


The Bell Stewart 2980075-01 is a high-quality tool designed for professionals and serious DIY enthusiast. Made from the best quality materials offer a long life and hassle-free operation. This Professional hand tool has been designed for the assembly of shielded SS-39200-0xx Cat 6 plugs only. It features a parallel action, full cycling, ratchet crimp action with a manual release. Also, the thumbscrew allows for a quick and easy die changes.

Features and Benefits:

• A highly durable hand tool designed for professional use

• Made from high-quality, lightweight materials. Weights only 460 g

• Compact size (210 mm x 60 mm)

• One-Step function allow contacts and shield to be crimped at the same time

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ's:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

관련된 링크들