Schneider Electric Acti9 iCT Contactor, 12V ac Coil, 2-Pole, 16 A, 1.3 W 12V ac, 2 NO, 250V ac

모든 Contactors 열람하기

Subtotal (1 unit)*

₩107,600.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 10월 23일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩107,600.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
791-2884
제조사 부품 번호:
A9C22012
제조업체:
Schneider Electric
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Schneider Electric

Coil Voltage

12V ac

Product Type

Contactor

Number of Poles

2

Contact Voltage

250V ac

Contact Current

16A

Power Rating

1.3W

Series

Acti9 iCT

Function

Motor Control

Mount Type

DIN Rail

Normal State Configuration

2 NO

Auxiliary Contact Configuration

2 NO

Number of Auxiliary Contacts

2

Terminal Type

Screw

Control Circuit Voltage Uc

12V ac

Minimum Operating Temperature

-5°C

Contactor Application

Motor Control

Operational Current Ie

16A

Maximum Operating Temperature

60°C

Depth

68mm

Width

81mm

Standards/Approvals

IEC/EN 61095, RoHS

Length

18mm

Pole and Throw Configuration

2P

Schneider Electric Acti 9 iCT Contactors


ACTi 9 iCT Contactors from Schneider Electric provides power switching in single phase 3 phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits


• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Impulse relay function

• Day-night function

• Class-2 insulation: continuous safety for operators and unqualified personnel

What is the difference between AC-7a and AC-7b when choosing a iCT contactor?


These utilization catagories determine what load the contactors are switching:

AC-7a are for slightly inductive loads for household appliances for example mixers and blenders

AC-7b are for motor-loads for house hold appliances such as fans and central vacuums

Do spacers have to be fitted between the iCT range of Contactors?


If several contactors are fitted onto an DIN Rail then spacers should be used after every second contactor. The reason for this is that with multiple contactors side by side there can be a very high build of heat causing the devices to reach above their operating temperature. The coils themselves are 100% rated so can be on for 24 hours a day and the heat needs to be dissipated, therefore a spacer is required

관련된 링크들