ABB GJL131 Contactor, 24V Coil, 3-Pole, 20 A, 5.5 kW 24V, 3 NO/1 NC, 690V

RS 제품 번호:: 253-4847
제조사 부품 번호:: GJL1313903R0011
제조업체:: ABB

ABB GJL131 Contactor, 24V Coil, 3-Pole, 20 A, 5.5 kW 24V, 3 NO/1 NC, 690V

모든 Contactors 열람하기

Subtotal (1 unit)*

₩437,080.00

제조사가 재고 비축중

2026년 11월 05일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩437,080.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 253-4847
제조사 부품 번호:: GJL1313903R0011
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Coil Voltage	24V
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	20A
	Power Rating	5.5kW
	Series	GJL131
	Mount Type	DIN Rail, Wall
	Function	Control Unit
	Normal State Configuration	3 NO/1 NC
	Auxiliary Contact Configuration	0 NO/1 NC
	Number of Auxiliary Contacts	1
	Terminal Type	Flat-Pin
	Operational Current Ie	20A
	Contactor Application	Control Unit
	Control Circuit Voltage Uc	24V
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	55°C
	Depth	46.7mm
	Width	96.2mm
	Standards/Approvals	IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1, UL 60947-4-1
	Length	46.7mm
	Pole and Throw Configuration	3P

	모두 선택
	브랜드 ABB
	Coil Voltage 24V
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 20A
	Power Rating 5.5kW
	Series GJL131
	Mount Type DIN Rail, Wall
	Function Control Unit
	Normal State Configuration 3 NO/1 NC
	Auxiliary Contact Configuration 0 NO/1 NC
	Number of Auxiliary Contacts 1
	Terminal Type Flat-Pin
	Operational Current Ie 20A
	Contactor Application Control Unit
	Control Circuit Voltage Uc 24V
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 55°C
	Depth 46.7mm
	Width 96.2mm
	Standards/Approvals IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1, UL 60947-4-1
	Length 46.7mm
	Pole and Throw Configuration 3P

Datasheet - GJL1313903R0011

COO (Country of Origin):: DE

ABB GJL131 Series Contactor, 24V Coil Voltage, 20A Contact Current - GJL1313903R0011

This contractor is a three-pole switching device designed for commercial, industrial and residential electrical control tasks. It operates a 24V control circuit to switch three-phase loads up to 20A per pole and is intended for reversing motor arrangements. The unit offers compatibility with standard industrial installation practices and meets recognised electrical performance standards.

Features and Benefits:

• 24V Coil enables low-voltage control for safety and interoperability
• 20A operational current supports moderate motor loads and circuits
• 3P configuration provides simultaneous three-phase switching for motors
• Reversing function simplifies direction control for motor applications
• Flat-pin terminals allow secure, high-contact connections under load
• UL and IEC approvals confirm conformity with international safety norms

Applications

• Suitable for reversing small to medium three-phase motors in factories
• Ideal for building services motor control in commercial premises
• Used with automation panels employing DIN-rail or wall mounting
• Can be used for residential three-phase motor switching and control

What mounting options are available for installation flexibility?

It can be mounted on DIN-rail or fixed directly to a wall to suit panel or enclosure arrangements.

How does the auxiliary contact configuration support control circuits?

A single auxiliary contact provides one normally closed auxiliary path to integrate with interlocks or signalling circuits.

What voltage and load ratings should be observed for switching?

The control Coil runs at 24V while the main contacts are rated for switching up to 690V at 20A operational current.

What environmental limits affect where it can be installed?

It is specified to operate between −20°C and 55°C, so ambient conditions should remain within that range.

What physical mounting footprint considerations apply in panel design?

The unit spans 96.2mm width with a Compact depth suitable for constrained enclosures.