ABB GJL131 Contactor, 32V dc Coil, 3-Pole, 20 A, 5.5 kW 17V, 32 V, 4 NO, 690V

RS 제품 번호:: 253-4841
제조사 부품 번호:: GJL1313061R5101
제조업체:: ABB

ABB GJL131 Contactor, 32V dc Coil, 3-Pole, 20 A, 5.5 kW 17V, 32 V, 4 NO, 690V

모든 Contactors 열람하기

Subtotal (1 unit)*

₩191,980.00

일시적 품절

2026년 9월 10일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩191,980.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 253-4841
제조사 부품 번호:: GJL1313061R5101
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Product Type	Contactor
	Coil Voltage	32V dc
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	20A
	Power Rating	5.5kW
	Series	GJL131
	Mount Type	DIN Rail, Wall
	Function	Mini Contactor
	Normal State Configuration	4 NO
	Auxiliary Contact Configuration	1 NO/0 NC
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Contactor Application	Control Unit
	Minimum Operating Temperature	-30°C
	Operational Current Ie	20A
	Control Circuit Voltage Uc	17, 32V
	Maximum Operating Temperature	70°C
	Depth	46.7mm
	Length	46.7mm
	Width	52.5mm
	Standards/Approvals	IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1
	Pole and Throw Configuration	3P

	모두 선택
	브랜드 ABB
	Product Type Contactor
	Coil Voltage 32V dc
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 20A
	Power Rating 5.5kW
	Series GJL131
	Mount Type DIN Rail, Wall
	Function Mini Contactor
	Normal State Configuration 4 NO
	Auxiliary Contact Configuration 1 NO/0 NC
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Contactor Application Control Unit
	Minimum Operating Temperature -30°C
	Operational Current Ie 20A
	Control Circuit Voltage Uc 17, 32V
	Maximum Operating Temperature 70°C
	Depth 46.7mm
	Length 46.7mm
	Width 52.5mm
	Standards/Approvals IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1
	Pole and Throw Configuration 3P

Datasheet - GJL1313061R5101

COO (Country of Origin):: DE

ABB GJL131 Series Contactor, 20A Operational Current, 690V Contact Voltage - GJL1313061R5101

This contactor is a Compact electromechanical switching device designed for control of three-phase loads in commercial, residential and industrial settings. It operates with a low-voltage DC control circuit to switch power circuits up to high voltages, and is intended for installation on DIN rail or wall-mounted panels where space efficiency and straightforward wiring are required.

Features and Benefits:

• 20A operational current supports common motor and load switching
• 5.5kW power rating allows handling of modest three-phase motors
• 17–32V DC control range enables flexible Coil supply options
• 3P screw Terminal arrangement simplifies robust power connections
• 4NO main contact configuration provides multiple simultaneous load outputs
• IEC/EN 60947 family approvals ensure conformity with industrial standards

Applications

• Suitable for motor control in light industrial automation panels
• Ideal for switching heating or ventilation loads in commercial buildings
• Used with residential distribution units for controlled load management
• Can be used for contactor-based relay replacement in control cabinets

What auxiliary contact arrangement is available for signalling or interlock?

One normally open auxiliary contact is provided for status feedback or interlocking circuits.

How does the control Coil accommodate different DC supplies?

The Coil accepts nominal 17V or 32V DC and is specified to operate across a 17 to 32V control range for tolerance to supply variation.

What environmental temperatures can it withstand during operation?

It is rated to operate down to -30°C and up to a maximum of 70°C for typical indoor installations.

Which mounting options allow flexible panel integration?

The unit can be fixed directly onto standard DIN rails or mounted to walls for non-rail installations.

What are the pole and throw characteristics for power switching?

It uses a three-pole configuration with four normally open main contacts to switch three-phase circuits.