ABB GJL131 Contactor, 42V Coil, 3-Pole, 20 A, 5.5 kW 42V, 4 NO, 250 V dc, 690V ac

RS 제품 번호:: 253-4818
제조사 부품 번호:: GJL1311901R0102
제조업체:: ABB

ABB GJL131 Contactor, 42V Coil, 3-Pole, 20 A, 5.5 kW 42V, 4 NO, 250 V dc, 690V ac

모든 Contactors 열람하기

Subtotal (1 pack of 5 units)*

₩1,841,180.00

제조사가 재고 비축중

2026년 9월 21일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
5 +	₩368,236.00	₩1,841,180.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 253-4818
제조사 부품 번호:: GJL1311901R0102
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Coil Voltage	42V
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	250, 690V dc
	Contact Current	20A
	Power Rating	5.5kW
	Series	GJL131
	Mount Type	DIN Rail, Wall
	Function	Reversing Contactor
	Normal State Configuration	4 NO
	Auxiliary Contact Configuration	1 NO/0 NC
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Contactor Application	Control Unit
	Operational Current Ie	20A
	Control Circuit Voltage Uc	42V
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	55°C
	Depth	46.7mm
	Length	46.7mm
	Width	96.2mm
	Standards/Approvals	UL 60947-1, UL 60947-4-1, IEC/EN 60947-5-1, IEC/EN 60947-4-1, IEC/EN 60947-1
	Pole and Throw Configuration	3P

	모두 선택
	브랜드 ABB
	Coil Voltage 42V
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 250, 690V dc
	Contact Current 20A
	Power Rating 5.5kW
	Series GJL131
	Mount Type DIN Rail, Wall
	Function Reversing Contactor
	Normal State Configuration 4 NO
	Auxiliary Contact Configuration 1 NO/0 NC
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Contactor Application Control Unit
	Operational Current Ie 20A
	Control Circuit Voltage Uc 42V
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 55°C
	Depth 46.7mm
	Length 46.7mm
	Width 96.2mm
	Standards/Approvals UL 60947-1, UL 60947-4-1, IEC/EN 60947-5-1, IEC/EN 60947-4-1, IEC/EN 60947-1
	Pole and Throw Configuration 3P

Datasheet - GJL1311901R0102

COO (Country of Origin):: DE

ABB GJL131 Series Contactor, 20A Operational Current, 42V Control Circuit Voltage - GJL1311901R0102

This contactor is an electromechanical switching device designed to control three-phase circuits in automation and electrical installations. It is intended for reversing applications and operates within industrial, commercial and residential systems, providing controlled switching of motors and loads where remote Coil actuation is required.

Features and Benefits:

• 42V Coil voltage enables low-voltage control circuits
• 20A operational current supports moderate motor loads
• 3P configuration allows three-pole switching for three-phase systems
• 5.5kW power rating accommodates small-to-medium motors
• 4NO main contacts deliver simultaneous make contacts for load paths
• Screw terminals and DIN rail or wall mounting simplify installation

Applications

• Suitable for reversing three-phase motor control in factories
• Ideal for control panels in commercial HVAC systems
• Used with residential motor-driven Gates and shutters
• Can be used for automation skids requiring remote switching

What switching voltages can the device handle on the load side?

It is rated for AC operation up to 690V and for DC switching up to 250V, permitting use on a wide range of supply types.

How many auxiliary contacts are available and how are they configured?

There is a single auxiliary contact provided, configured as one normally open contact for signalling or interlocking tasks.

What environmental temperature range does it support during operation?

It is specified to operate from -20°C up to a maximum of 55°C, covering typical indoor and sheltered outdoor conditions.

Which mounting and Terminal arrangements aid panel integration?

The unit accepts DIN rail fitting or wall mounting and uses screw-type terminals for secure conductor connections.

What approvals or standards does the component conform to?

It complies with recognised international standards for industrial control equipment, including UL and IEC/EN specifications.