제조사부품번호

ABB 1SBL41 Contactor, 220V, 230 V Coil, 3-Pole, 100 A 220V, 230 V, 3 NO, 1kV

RS 제품 번호:: 253-2035
제조사 부품 번호:: 1SBL411025R8000
제조업체:: ABB

ABB 1SBL41 Contactor, 220V, 230 V Coil, 3-Pole, 100 A 220V, 230 V, 3 NO, 1kV

모든 Contactors 열람하기

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

RS 제품 번호:: 253-2035
제조사 부품 번호:: 1SBL411025R8000
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Product Type	Contactor
	Coil Voltage	220V, 230V
	Number of Poles	3
	Contact Voltage	1kV
	Contact Current	100A
	Series	1SBL41
	Function	Control Unit
	Normal State Configuration	3 NO
	Number of Auxiliary Contacts	0
	Terminal Type	Screw
	Control Circuit Voltage Uc	220V, 230V
	Contactor Application	Control Unit
	Minimum Operating Temperature	-40°C
	Operational Current Ie	120A
	Maximum Operating Temperature	70°C
	Width	70mm
	Standards/Approvals	EU Directive 2011/65/EU RoHS Status
	Length	108mm
	Depth	132mm
	Pole and Throw Configuration	1P

	모두 선택
	브랜드 ABB
	Product Type Contactor
	Coil Voltage 220V, 230V
	Number of Poles 3
	Contact Voltage 1kV
	Contact Current 100A
	Series 1SBL41
	Function Control Unit
	Normal State Configuration 3 NO
	Number of Auxiliary Contacts 0
	Terminal Type Screw
	Control Circuit Voltage Uc 220V, 230V
	Contactor Application Control Unit
	Minimum Operating Temperature -40°C
	Operational Current Ie 120A
	Maximum Operating Temperature 70°C
	Width 70mm
	Standards/Approvals EU Directive 2011/65/EU RoHS Status
	Length 108mm
	Depth 132mm
	Pole and Throw Configuration 1P

COO (Country of Origin):: BG

ABB GA75 Series Contactor, 125A Contact Current, 220 to 230V Control Circuit Voltage - 1SBL411025R8000

This contactor is a DC switching device designed for industrial control applications where reliable opening and closing of DC circuits is required. It operates with an AC control Coil and is configured as a three-pole, single-pole connection device with three normally open contacts. The unit is intended for integration into power control assemblies and offers robust electrical switching capability for medium to high DC voltages up to 1000 V.

Features & Benefits

• Rated for continuous DC switching at 125A providing high-current handling
• AC Coil rated 220 to 230V enabling standard mains control
• Screw terminals support heavy conductors for secure connections
• Arc chutes with permanent magnets reduce DC breaking stress
• Mechanical endurance of 10 million cycles for long service life

Applications

• Suitable for DC power distribution switching in industrial plants
• Ideal for traction or battery system switching solutions
• Used for control of DC motors and large resistive loads
• Can be used in renewable energy storage and inverter protection

What Terminal types are provided for main connections?

Main poles use screw terminals with M6 screws and a 13x10mm connector option for reliable conductor clamping and high-current capacity.

How does Coil consumption affect control panel design?

Pull-in and holding values vary by frequency

pull-in around 180 to 190 V·A and holding approximately 18 to 21 V·A, which informs relay or driver sising and thermal loading in the control supply.

What environmental limits should be observed during installation?

Operate between −40 °C and +70 °C at nominal control voltage, with storage down to −60 °C and permitted altitude up to 3000 m

these conditions influence placement and enclosure selection.

How quickly does it switch under normal conditions?

Typical operate times are 8 to 27 MS to close and 4 to 11 MS to open, which assists coordination with protection devices and timing-sensitive control schemes.