ABB UA75 Contactor, 380V, 400 V Coil, 3-Pole 380V, 400 V, 3 NO, 690V

RS 제품 번호:: 253-2034
제조사 부품 번호:: 1SBL411022R8500
제조업체:: ABB

ABB UA75 Contactor, 380V, 400 V Coil, 3-Pole 380V, 400 V, 3 NO, 690V

모든 Contactors 열람하기

Subtotal (1 unit)*

₩1,461,120.00

제조사가 재고 비축중

2026년 10월 12일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩1,461,120.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 253-2034
제조사 부품 번호:: 1SBL411022R8500
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Coil Voltage	380, 400V
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	690V
	Series	UA75
	Mount Type	DIN Rail
	Function	Capacitor Switching
	Normal State Configuration	3 NO
	Number of Auxiliary Contacts	0
	Terminal Type	Screw
	Minimum Operating Temperature	-60°C
	Control Circuit Voltage Uc	380, 400V
	Operational Current Ie	1300A
	Contactor Application	Control Unit
	Maximum Operating Temperature	80°C
	Length	108mm
	Standards/Approvals	VDE 0110, EN 60529, EU Directive 2011/65/EU, IEC 60529, IEC 60947-1, UL/CSA 600, IEC 60947-4-1
	Depth	110mm
	Width	70mm
	Pole and Throw Configuration	3P

	모두 선택
	브랜드 ABB
	Coil Voltage 380, 400V
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 690V
	Series UA75
	Mount Type DIN Rail
	Function Capacitor Switching
	Normal State Configuration 3 NO
	Number of Auxiliary Contacts 0
	Terminal Type Screw
	Minimum Operating Temperature -60°C
	Control Circuit Voltage Uc 380, 400V
	Operational Current Ie 1300A
	Contactor Application Control Unit
	Maximum Operating Temperature 80°C
	Length 108mm
	Standards/Approvals VDE 0110, EN 60529, EU Directive 2011/65/EU, IEC 60529, IEC 60947-1, UL/CSA 600, IEC 60947-4-1
	Depth 110mm
	Width 70mm
	Pole and Throw Configuration 3P

COO (Country of Origin):: BG

ABB UA75 Series Contactor, 380/400V Control Circuit Voltage, 1300A Operational Current Ie - 1SBL411022R8500

This contactor is a three-pole device designed for switching capacitor banks in industrial electrical installations. It operates from an AC control supply around 380 to 400V (50 Hz) or 400 to 415V (60 Hz) and is intended for high‑current capacitor switching where inrush peaks do not exceed 100 times the nominal RMS current. The unit is built for DIN‑rail mounting and is delivered with screw‑type main terminals.

Features & Benefits

• Rated operational current 1300A delivers high‑current switching capability
• Three normally open poles provide dedicated capacitor‑switching contacts
• 690V main‑circuit rating supports medium‑voltage capacitor banks
• Coil consumption and pull‑in values enable predictable control performance
• Mechanical durability of 10 million operations ensures long service life
• Operating temperature range from -40 °C to +70 °C suits varied site conditions

Applications

• Suitable for switching low‑inductance capacitor banks in power‑factor correction
• Ideal for industrial motor control rooms requiring intermittent capacitor switching
• Can be used for retrofit capacitor bank panels on DIN‑rail backplates
• Used for centralised capacitor control in commercial electrical distribution

What connection types are provided for the main circuit?

Main poles use screw terminals capable of flexible cable with crimped end ferrules or rigid conductors sized for heavy currents.

How fast does the contactor operate electrically?

Typical timings range from 8 to 27 MS for contact closing after Coil energisation and 4 to 11 MS for contact opening after Coil release.

What environmental limits apply for storage and operation?

It can be stored between -60 °C and +80 °C

permitted operating ambient temperature ranges vary with control voltage, allowing up to +70 °C for the rated control supply.

What protections or standards relate to insulation and impulse resistance?

The device is rated for 690V operational insulation, with an impulse withstand of 8 kV and tested up to 1 000V for certain standards.