ABB UA26 Contactor, 24V ac Coil, 3-Pole, 26 A 24V ac, 3 NO, 690V

RS 제품 번호:: 253-1959
제조사 부품 번호:: 1SBL241022R8110
제조업체:: ABB

ABB UA26 Contactor, 24V ac Coil, 3-Pole, 26 A 24V ac, 3 NO, 690V

모든 Contactors 열람하기

Subtotal (1 unit)*

₩404,540.00

일시적 품절

2026년 10월 05일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩404,540.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 253-1959
제조사 부품 번호:: 1SBL241022R8110
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Coil Voltage	24V ac
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	26A
	Series	UA26
	Mount Type	DIN Rail
	Function	Capacitor Switching
	Normal State Configuration	3 NO
	Auxiliary Contact Configuration	1 NO
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Control Circuit Voltage Uc	24V ac
	Minimum Operating Temperature	-40°C
	Contactor Application	Control Unit
	Operational Current Ie	2A
	Maximum Operating Temperature	70°C
	Standards/Approvals	EU Directive 2011/65/EU RoHS Status
	Depth	90mm
	Width	54mm
	Length	94mm
	Pole and Throw Configuration	3P

	모두 선택
	브랜드 ABB
	Coil Voltage 24V ac
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 26A
	Series UA26
	Mount Type DIN Rail
	Function Capacitor Switching
	Normal State Configuration 3 NO
	Auxiliary Contact Configuration 1 NO
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Control Circuit Voltage Uc 24V ac
	Minimum Operating Temperature -40°C
	Contactor Application Control Unit
	Operational Current Ie 2A
	Maximum Operating Temperature 70°C
	Standards/Approvals EU Directive 2011/65/EU RoHS Status
	Depth 90mm
	Width 54mm
	Length 94mm
	Pole and Throw Configuration 3P

COO (Country of Origin):: BG

ABB UA26 Series Contactor, 16A Contact Current, 24VAc Coil Voltage - 1SBL241022R8110

This contactor is a three‑pole control unit designed for switching capacitor banks in industrial electrical systems. It operates from an AC control circuit and is intended for DIN‑rail installation in control panels. The device is suitable where controlled engagement of capacitors is required while managing inrush peaks and frequent switching cycles.

Features & Benefits

• 3P switching limits contacts to three main poles for capacitor control
• 16A conventional thermal current supports moderate load switching
• 24V AC control circuit enables common low‑voltage panel integration
• Accepts Peak inrush up to 100x nominal rms current protecting banks
• 3600 cycles per hour mechanical frequency for high switching rates

Applications

• Suitable for staged capacitor bank switching in power factor correction
• Ideal for motor control centres requiring reactive power management
• used with low‑voltage distribution panels for load compensation
• Can be used for retrofit replacement in existing contactor arrays

What Terminal types are provided for connection?

Screw terminals are supplied for both main and auxiliary circuits, with Pozidriv screws and cable clamps for secure terminations.

How does the product perform at elevated ambient temperatures?

It maintains rated operational powers with reduced kvar capacities as temperature rises, with specific permitted kvar values defined up to 70°C near the device.

What protection and fuse recommendations apply?

Auxiliary circuits are compatible with gG fuses and recommended short‑circuit protective devices range to match operational currents specified for different voltages.

What mechanical and electrical durability can be expected?

When capacitors are discharged to ≤50V before re‑energisation, electrical endurance reaches 100000 operating cycles with a block‑type pole design.