ABB UA16 Contactor, 230V, 240 V Coil, 3-Pole, 80 A 230V, 240 V, 3 NO, 690V

모든 Contactors 열람하기

Subtotal (1 unit)*

₩560,440.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 9월 11일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩560,440.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
253-1941
제조사 부품 번호:
1SBL181024R8810
제조업체:
ABB
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

ABB

Coil Voltage

230, 240V

Product Type

Contactor

Number of Poles

3

Contact Voltage

690V

Contact Current

80A

Series

UA16

Mount Type

DIN Rail

Function

Capacitor Switching

Normal State Configuration

3 NO

Number of Auxiliary Contacts

1

Auxiliary Contact Configuration

1 NO

Terminal Type

Screw

Control Circuit Voltage Uc

230, 240V

Contactor Application

Control Unit

Operational Current Ie

80A

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

70°C

Standards/Approvals

EN 60529, EU 2011/65/EU, IEC 60529, IEC 60947-1

Width

44mm

Depth

107mm

Length

120mm

Pole and Throw Configuration

3P

COO (Country of Origin):
BG

ABB UA16 Series Contactor, 80A Contact Current, 230/240V Coil Voltage - 1SBL181024R8810


This contactor is a compact, three-pole switching device designed for capacitor bank control in industrial installations. It operates with an AC control circuit and integrates front-mounted damping resistors to limit inrush and pre-charge capacitors, making it suitable where Peak currents greatly exceed nominal values. The unit is intended for DIN-rail mounting and includes a single normally open auxiliary contact for control and signalling functions.

Features & Benefits


• 80A operational current supports heavy-duty switching loads
• 690V rated voltage allows use up to high-voltage systems
• 230 to 240V Coil consumption specified for AC control circuits
• 3NO main pole arrangement ensures independent three-phase switching
• Screw terminals provide secure DIN-rail connection
• Damping resistors limit capacitor energisation current peaks

Applications


• Suitable for capacitor switching panels in power factor correction
• Ideal for installation in industrial automation control cubicles
• Can be used for sequential capacitor bank pre-charging arrangements
• Suitable for retrofit or new DIN-rail distribution board assemblies

What are the electrical endurance expectations for heavy switching?


The device is rated for up to 250,000 operating cycles when switching below 500V and 100,000 cycles for voltages between 500V and 690 V, reflecting its durability under frequent capacitor operations.

How does the front-mounted Block affect operation?


The front Block places three damping resistors in series with each phase to reduce initial inrush and provide controlled pre-charging, reducing the secondary current Peak at main pole closure.

What environmental temperature ranges are supported during operation?


It is specified for operation in free Air from −40 °C up to +70 °C when run at rated control voltage, with storage capability down to −60 °C.

Which short-circuit protective devices are applicable?


The product is compatible with gG fuses up to 80A for short-circuit protection and has maximum breaking capacity values defined for 440V and 690V systems.

What connection sizes are acceptable for field wiring?


Main and auxiliary circuits accept flexible conductors with ferrules from 0.75mm² to 2.5mm² and rigid conductors from 1mm² to 4mm² using the screw-type terminals.

관련된 링크들