ABB 1SBL18 Contactor, 110V Coil, 3-Pole, 16 A, 3 NO, 690V

RS 제품 번호:: 253-1937
제조사 부품 번호:: 1SBL181022R8410
제조업체:: ABB

ABB 1SBL18 Contactor, 110V Coil, 3-Pole, 16 A, 3 NO, 690V

모든 Contactors 열람하기

Subtotal (1 unit)*

₩318,280.00

단종되는 중

최종적인 2 개 unit(s)이 배송 준비 됨

수량	한팩당
1 +	₩318,280.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 253-1937
제조사 부품 번호:: 1SBL181022R8410
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Product Type	Contactor
	Coil Voltage	110V
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	16A
	Series	1SBL18
	Function	Control Unit
	Mount Type	DIN Rail
	Normal State Configuration	3 NO
	Auxiliary Contact Configuration	1 NO
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Contactor Application	Control Unit
	Minimum Operating Temperature	-60°C
	Operational Current Ie	6A
	Maximum Operating Temperature	80°C
	Length	74mm
	Depth	74mm
	Standards/Approvals	RoHS Status, EU Directive 2011/65/EU
	Width	44mm
	Pole and Throw Configuration	3P

	모두 선택
	브랜드 ABB
	Product Type Contactor
	Coil Voltage 110V
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 16A
	Series 1SBL18
	Function Control Unit
	Mount Type DIN Rail
	Normal State Configuration 3 NO
	Auxiliary Contact Configuration 1 NO
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Contactor Application Control Unit
	Minimum Operating Temperature -60°C
	Operational Current Ie 6A
	Maximum Operating Temperature 80°C
	Length 74mm
	Depth 74mm
	Standards/Approvals RoHS Status, EU Directive 2011/65/EU
	Width 44mm
	Pole and Throw Configuration 3P

COO (Country of Origin):: BG

ABB UA16 Series Contactor, 110V Coil Voltage, 6A Operational Current - 1SBL181022R8410

This contactor is a three-pole control unit designed for switching capacitor banks in industrial electrical systems. It operates from AC control circuits at 50/60 Hz and is suited to applications where precise capacitor switching and Compact DIN-rail mounting are required.

Features & Benefits

• 6A operational current supports moderate load switching
• 110 to 120V control circuit enables 50/60 Hz compatibility
• 690V main contact rating handles high-voltage capacitor banks
• 1 NO auxiliary screw Terminal provides simple signalling integration
• -60 °C to 80 °C temperature range allows extreme storage and use
• 3,600 mechanical cycles per hour supports frequent operation

Applications

• Suitable for capacitor bank switching in power factor correction panels
• Ideal for industrial automation control cabinets on DIN rail
• Used for switching capacitors with high Peak inrush currents within limits
• Can be used where Compact width and shallow depth are required

What inrush current conditions can it tolerate when switching capacitors?

It accepts capacitor switching where inrush peaks are up to 100 times the nominal RMS current and requires capacitors to be discharged to ≤50V before re-energisation.

How does the unit connect within a control panel?

Main and auxiliary circuits use screw terminals with cable clamps

main poles are delivered in the open position for straightforward wiring.

What are the Coil consumption and operate times?

Average pull-in and holding values vary with frequency

pull-in values are approximately 70 to 74 V·A and 70 to 80 V·A depending on 50/60 Hz, with operate times between 10 to 26 MS for closing and 4 to 11 MS for opening sequences.

Which protective devices are appropriate for short-circuit protection?

Short-circuit protective devices include gG fuses in recommended ranges and specific breaking capacities at 440V and 690V according to cos φ conditions.