제조사부품번호

ABB, EF19 Overload Relay 1 NO/1 NC, 1.9A, 6.3 A F.L.C, 6.3A Contact Rating, 83 W 3

RS 제품 번호:: 711-6575
제조사 부품 번호:: 1SAX121001R1104 EF19-6.3
제조업체:: ABB

ABB, EF19 Overload Relay 1 NO/1 NC, 1.9A, 6.3 A F.L.C, 6.3A Contact Rating, 83 W 3

모든 Contactor Overload Relays 열람하기

Subtotal (1 unit)*

₩204,140.00

재고있음

추가로 2026년 8월 24일 부터 6 개 단위 배송
추가로 2026년 9월 11일 부터 4 개 단위 배송
추가로 2026년 10월 09일 부터 4 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩204,140.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 711-6575
제조사 부품 번호:: 1SAX121001R1104 EF19-6.3
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Product Type	Overload Relay
	FLC Motor Rating	1.9, 6.3A
	Relay Contact Current	6.3A
	Series	EF19
	Mount Type	Direct
	Pole and Throw Configuration	3
	Power Rating	83W
	Normal State Configuration	1 NO/1 NC
	Terminal Type	Screw
	Reset Method	Automatic & Manual
	IP Rating	IP20
	Width	44.4mm
	Minimum Operating Temperature	-25°C
	Number of Auxiliary Contacts	2
	Adjustable Current Range	1.90 → 6.30 A
	Maximum Operating Temperature	70°C
	Contact Voltage	690V ac/dc
	Length	85mm
	Standards/Approvals	CE, CSA 22.2 No. 14, cULus UL 508, IEC/EN 60497-5-1, IEC/EN 60947-1, IEC/EN 60947-4-1, UL 508
	Depth	59.3mm
	Supply Voltage	600V

	모두 선택
	브랜드 ABB
	Product Type Overload Relay
	FLC Motor Rating 1.9, 6.3A
	Relay Contact Current 6.3A
	Series EF19
	Mount Type Direct
	Pole and Throw Configuration 3
	Power Rating 83W
	Normal State Configuration 1 NO/1 NC
	Terminal Type Screw
	Reset Method Automatic & Manual
	IP Rating IP20
	Width 44.4mm
	Minimum Operating Temperature -25°C
	Number of Auxiliary Contacts 2
	Adjustable Current Range 1.90 → 6.30 A
	Maximum Operating Temperature 70°C
	Contact Voltage 690V ac/dc
	Length 85mm
	Standards/Approvals CE, CSA 22.2 No. 14, cULus UL 508, IEC/EN 60497-5-1, IEC/EN 60947-1, IEC/EN 60947-4-1, UL 508
	Depth 59.3mm
	Supply Voltage 600V

ABB Overload Relay, Screw Terminals, 2 Auxiliary Contacts - EF19 Series - 1SAX121001R1104 EF19-6.3

Keen to steer your motor-driven kit clear of electrical faults? Put this ABB overload relay into the driving seat. As the unit trips for overload and phase failure, it cuts the risk of machine damage caused by everyday power issues. An adjustable current setting between 1.9 and 6.3A means it adapts to its supply to deliver flexible protection. Connecting the device to a contactor (764-8983) is easy, thanks to its snappy plug-in fitting. For handy automated control, two auxiliary contacts are on hand to signal linked devices when it trips.

Features & Benefits

• Screw conductor terminals for a tight hold against movement

• Automatic and manual reset modes for close restart control

• Trip-free mechanism breaks the circuit without moving the actuator, minimising disruption from tampering

• Test button simulates fault signals to quickly check circuit safety

• Screw dial controls to easily adjust current setting and reset mode

Applications

• Motor starters

• Industrial automation

• Bottling plants

Where does this overload relay draw power from?

This device draws power from its contactor, cutting the need to wire up a separate power supply.

ABB, EF19 Overload Relay 1 NO/1 NC, 1.9A, 6.3 A F.L.C, 6.3A Contact Rating, 83 W 3

ABB Overload Relay, Screw Terminals, 2 Auxiliary Contacts - EF19 Series - 1SAX121001R1104 EF19-6.3

Features & Benefits

Applications

Where does this overload relay draw power from?

관련된 링크들