ITT Cannon Circular Connector Backshell

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩12,144.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 16일 부터 35 개 단위 배송
  • 추가로 2025년 12월 26일 부터 100 개 단위 배송
  • 추가로 2026년 2월 13일 부터 100 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 19₩12,144.80
20 - 39₩11,787.60
40 +₩11,317.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
273-5483
제조사 부품 번호:
TNA24CA01-25L / 192900-0185
제조업체:
ITT Cannon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

ITT Cannon

Length

39mm

COO (Country of Origin):
HU

Rear Housing


Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.


Neptune


Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

관련된 링크들