ITT Cannon, TNMSize 24 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- RS 제품 번호:
- 167-9758
- 제조사 부품 번호:
- TNA24CC-HC00L / 192900-0498
- 제조업체:
- ITT Cannon
Subtotal (1 unit)*
₩40,908.80
재고있음
- 40 개 단위 배송 준비 완료
- 추가로 2026년 2월 26일 부터 100 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩40,908.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 167-9758
- 제조사 부품 번호:
- TNA24CC-HC00L / 192900-0498
- 제조업체:
- ITT Cannon
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ITT Cannon | |
| Product Type | Circular Connector Backshell | |
| For Use With | Connector | |
| Shell Size | 24 | |
| Orientation | Straight | |
| Gender | Female | |
| Housing Material | Thermoplastic | |
| Colour | Black | |
| Length | 128.5mm | |
| IP Rating | IP67 | |
| Strain Relief | Yes | |
| Series | TNM | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 ITT Cannon | ||
Product Type Circular Connector Backshell | ||
For Use With Connector | ||
Shell Size 24 | ||
Orientation Straight | ||
Gender Female | ||
Housing Material Thermoplastic | ||
Colour Black | ||
Length 128.5mm | ||
IP Rating IP67 | ||
Strain Relief Yes | ||
Series TNM | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- HU
ITT Cannon Backshell
The ITT Cannon Trident Neptune series backshell is a circular connector with 24 shell size, membrane wire seal equipment. The connector body is made from black nylon material with nickel-plated copper alloy coupling ring and stainless steel bayonet pins. It accepts various combinations of signal (13A) and power (30A) contacts.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal, which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Features and Benefits
Durability of 500 mating cycles
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
관련된 링크들
- ITT Cannon, TNMSize 24 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- ITT Cannon, TNMSize 14 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- ITT Cannon, TNMSize 16 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- ITT Cannon, TNASize 16 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- ITT Cannon, TNASize 14 Straight Circular Connector Backshell Strain Relief, For Use With Neptune Circular Connector, TNM
- ITT Cannon, TNMSize 10 Straight Circular Connector Backshell, For Use With Jacketed Cable
- ITT Cannon, Trident TNMSize 14 Straight Circular Connector Backshell, For Use With Unsealed Plugs and Receptables,
- ITT Cannon, TNMSize 12 Straight Circular Connector Backshell, For Use With Unsealed Plugs and Receptables, 8-Way