ITT Cannon, TNMSize 10 Straight Circular Connector Backshell, For Use With Jacketed Cable
- RS 제품 번호:
- 265-9777
- 제조사 부품 번호:
- TNA10CC-SE00L / 192993-0081
- 제조업체:
- ITT Cannon
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩46,323.20
재고있음
- 92 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 19 | ₩46,323.20 |
| 20 - 39 | ₩44,480.80 |
| 40 + | ₩42,619.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 265-9777
- 제조사 부품 번호:
- TNA10CC-SE00L / 192993-0081
- 제조업체:
- ITT Cannon
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ITT Cannon | |
| For Use With | Jacketed Cable | |
| Product Type | Circular Connector Backshell | |
| Shell Size | 10 | |
| Orientation | Straight | |
| Gender | Female | |
| Colour | Silver | |
| Length | 88.5mm | |
| IP Rating | IP67 | |
| Strain Relief | No | |
| Series | TNM | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 ITT Cannon | ||
For Use With Jacketed Cable | ||
Product Type Circular Connector Backshell | ||
Shell Size 10 | ||
Orientation Straight | ||
Gender Female | ||
Colour Silver | ||
Length 88.5mm | ||
IP Rating IP67 | ||
Strain Relief No | ||
Series TNM | ||
Standards/Approvals No | ||
Shielded Backshell
Provides cable shielding termination
Internal braid is grounded to outer shell
Available in a standard or large cable exit
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
관련된 링크들
- ITT Cannon, Trident TNMSize 14 Straight Circular Connector Backshell, For Use With Unsealed Plugs and Receptables,
- ITT Cannon, TNMSize 12 Straight Circular Connector Backshell, For Use With Unsealed Plugs and Receptables, 8-Way
- ITT Cannon, TNMSize 14 Straight Circular Connector Backshell, For Use With Unsealed Plug and Receptacles, 36-Way
- ITT Cannon, TNMSize 16 Straight Circular Connector Backshell, For Use With Unsealed Plug and Receptacles, 36-Way
- ITT CannonSize 16 Straight Circular Connector Backshell, For Use With Jacketed Cable, 36-Way
- ITT Cannon, TNMSize 14 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- ITT Cannon, TNMSize 24 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- ITT Cannon, TNMSize 16 Straight Circular Connector Backshell Strain Relief, For Use With Connector
