Infineon TLT9255WLCXUMA1, CAN Transceiver 5 Mbps, 14-Pin TSON

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 CAN Interface Ics 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 2 units)*

₩6,843.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 2월 09일 부터 5,000 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
2 - 8₩3,421.60₩6,843.20
10 - 98₩3,073.80₩6,147.60
100 - 248₩2,895.20₩5,790.40
250 - 498₩2,509.80₩5,019.60
500 +₩2,387.60₩4,775.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
258-1711
제조사 부품 번호:
TLT9255WLCXUMA1
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Maximum Data Rate

5Mbps

Product Type

CAN Transceiver

Sub Type

Interface IC

Power Down Mode

High Speed

Supply Current

35mA

Mount Type

Surface

Interface Type

CAN

Package Type

TSON

Pin Count

14

Minimum Supply Voltage

4.75V

Maximum Supply Voltage

40V

ESD Protection

Yes

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Standards/Approvals

ISO 11898-2, RoHS

Height

1mm

Length

4.5mm

Width

3 mm

Automotive Standard

AEC-Q100

The Infineon HS CAN transceiver with partial networking is interface between the physical bus layer and the CAN protocol controller, the HS CAN transceiver with partial networking drives the signals to the bus and protects the microcontroller from interference generated within the network. Based on the high symmetry of the CANH and CANL signals, the HS CAN transceiver with partial networking provides a very low level of electromagnetic emission within a wide frequency range, allowing the operation of the HS CAN transceiver with partial networking without a common mode choke in automotive and industrial applications. The HS CAN transceiver with partial networking is enclosed in an RoHS compliant PG-TSON-14 package and fulfils the requirements of the ISO11898-2.

HS CAN standard data rates up to 1MBit/s

CAN FD data rates up to 5 MBit/s

Wide common mode range for electromagnetic immunity

Very low electromagnetic emission

Excellent ESD robustness, ±10 kV according to IEC 61000-4-2

Independent supply concept on VCC and VBAT pins

관련된 링크들