The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters required. In addition, the MCP25625 connects directly to the physical CAN bus, supporting all requirements for CAN high-speed transceivers.

Stand-Alone CAN2.0B Controller with Integrated CAN Transceiver and Serial Peripheral Interface (SPI)
Up to 1 Mb/s Operation
Very Low Standby Current (10 μA, typical).
Up to 10 MHz SPI Clock Speed
Interfaces Directly with Microcontrollers with 2.7V to 5.5V I/O
Available in SSOP-28L and 6x6 QFN-28L
Temperature Ranges:
Extended (E): -40°C to +125°C

모두 선택	제품 정보	값
	브랜드	Microchip
	Maximum Data Rate	1Mbps
	Number of Transceivers	1
	Standard Supported	CAN 2.0B
	IC Type	CAN Controller IC
	Power Down Mode	Sleep, Standby
	Maximum Supply Current	10 mA
	Mounting Type	Surface Mount
	Package Type	QFN
	Pin Count	28
	Dimensions	6 x 6 x 0.92mm
	Length	6mm
	Width	6mm
	Height	0.92mm
	Maximum Operating Supply Voltage	5.5 V
	Maximum Operating Temperature	+125 °C
	Minimum Operating Supply Voltage	2.7 V
	Minimum Operating Temperature	-40 °C

	모두 선택
	브랜드 Microchip
	Maximum Data Rate 1Mbps
	Number of Transceivers 1
	Standard Supported CAN 2.0B
	IC Type CAN Controller IC
	Power Down Mode Sleep, Standby
	Maximum Supply Current 10 mA
	Mounting Type Surface Mount
	Package Type QFN
	Pin Count 28
	Dimensions 6 x 6 x 0.92mm
	Length 6mm
	Width 6mm
	Height 0.92mm
	Maximum Operating Supply Voltage 5.5 V
	Maximum Operating Temperature +125 °C
	Minimum Operating Supply Voltage 2.7 V
	Minimum Operating Temperature -40 °C

Microchip MCP25625T-E/ML, CAN Controller 1Mbps CAN 2.0B, 28-Pin QFN

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.