Microchip MCP25625T-E/ML, CAN Controller 1Mbps CAN 2.0B, 28-Pin QFN

모든 CAN Interface Ics 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 1600 units)*

₩6,449,152.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1,600 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
1600 - 6400₩4,030.72₩6,449,753.60
8000 +₩3,949.88₩6,320,710.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
177-2856
제조사 부품 번호:
MCP25625T-E/ML
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Maximum Data Rate

1Mbps

Number of Transceivers

1

IC Type

CAN Controller IC

Standard Supported

CAN 2.0B

Power Down Mode

Sleep, Standby

Maximum Supply Current

10 mA

Mounting Type

Surface Mount

Package Type

QFN

Pin Count

28

Dimensions

6 x 6 x 0.92mm

Length

6mm

Width

6mm

Height

0.92mm

Maximum Operating Supply Voltage

5.5 V

Minimum Operating Supply Voltage

2.7 V

Maximum Operating Temperature

+125 °C

Minimum Operating Temperature

-40 °C

The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters required. In addition, the MCP25625 connects directly to the physical CAN bus, supporting all requirements for CAN high-speed transceivers.

Stand-Alone CAN2.0B Controller with Integrated CAN Transceiver and Serial Peripheral Interface (SPI)
Up to 1 Mb/s Operation
Very Low Standby Current (10 μA, typical).
Up to 10 MHz SPI Clock Speed
Interfaces Directly with Microcontrollers with 2.7V to 5.5V I/O
Available in SSOP-28L and 6x6 QFN-28L
Temperature Ranges:
Extended (E): -40°C to +125°C

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들