Microchip MCP2561-E/MF, CAN Transceiver 1Mbps ISO 11898-2, ISO 11898-5, 8-Pin DFN

모든 CAN Interface Ics 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 10 units)*

₩17,709.60

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 270 개 unit(s)이 배송 준비 됨
수량
한팩당
한팩당*
10 - 20₩1,770.96₩17,700.20
30 +₩1,731.48₩17,311.04

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
177-1996
제조사 부품 번호:
MCP2561-E/MF
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Maximum Data Rate

1Mbps

Number of Transceivers

1

IC Type

CAN Transceiver IC

Standard Supported

ISO 11898-2, ISO 11898-5

Power Down Mode

Normal, Standby

Maximum Supply Current

70 mA

Mounting Type

Surface Mount

Package Type

DFN

Pin Count

8

Dimensions

3 x 3 x 0.95mm

Length

3mm

Width

3mm

Height

0.95mm

Maximum Operating Supply Voltage

5.5 V

Minimum Operating Supply Voltage

4.5 V

Maximum Operating Temperature

+125 °C

Automotive Standard

AEC-Q100

Minimum Operating Temperature

-40 °C

The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length.The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin

Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
CAN Bus Pins are

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들