Microchip MCP2562-H/MF, CAN Transceiver 1 Mbps, 8-Pin DFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 CAN Interface Ics 열람하기

Subtotal (1 pack of 10 units)*

₩19,890.40

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 3월 25일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩1,989.04₩19,890.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
177-1930
제조사 부품 번호:
MCP2562-H/MF
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

CAN Transceiver

Maximum Data Rate

1Mbps

Number of Transceivers

1

Sub Type

CAN Transceiver

Power Down Mode

Standby, Normal

Supply Current

70mA

Mount Type

Surface

Interface Type

ISO 11898-5, ISO 11898-2

Package Type

DFN

Pin Count

8

Minimum Supply Voltage

4.5V

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

ESD Protection

Yes

Maximum Operating Temperature

150°C

Height

0.95mm

Width

3 mm

Length

3mm

Standards/Approvals

No

Series

MCP2562

Automotive Standard

AEC-Q100

COO (Country of Origin):
TH
The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation

Implements ISO-11898-5 standard physical layer requirements

Very low standby current (Typ: 5μA)

VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O

SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes

CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus

Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus

Power-on Reset and voltage brown-out protectionon VDD and VIO pin

관련된 링크들