제조사부품번호

Microchip, CAN Transceiver 1 Mbps, 8-Pin DFN

RS 제품 번호:: 177-1633
제조사 부품 번호:: MCP2562-H/MF
제조업체:: Microchip

Microchip, CAN Transceiver 1 Mbps, 8-Pin DFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tube of 120 units)*

₩196,948.80

일시적 품절

2026년 3월 26일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
120 - 480	₩1,641.24	₩197,039.04
600 +	₩1,609.28	₩193,113.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 177-1633
제조사 부품 번호:: MCP2562-H/MF
제조업체:: Microchip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Microchip
	Product Type	CAN Transceiver
	Maximum Data Rate	1Mbps
	Number of Transceivers	1
	Sub Type	CAN Transceiver
	Power Down Mode	Standby, Normal
	Supply Current	70mA
	Mount Type	Surface
	Interface Type	ISO 11898-5, ISO 11898-2
	Package Type	DFN
	Pin Count	8
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	5.5V
	Minimum Operating Temperature	-40°C
	ESD Protection	Yes
	Maximum Operating Temperature	150°C
	Width	3 mm
	Height	0.95mm
	Length	3mm
	Standards/Approvals	No
	Series	MCP2562
	Automotive Standard	AEC-Q100

	모두 선택
	브랜드 Microchip
	Product Type CAN Transceiver
	Maximum Data Rate 1Mbps
	Number of Transceivers 1
	Sub Type CAN Transceiver
	Power Down Mode Standby, Normal
	Supply Current 70mA
	Mount Type Surface
	Interface Type ISO 11898-5, ISO 11898-2
	Package Type DFN
	Pin Count 8
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 5.5V
	Minimum Operating Temperature -40°C
	ESD Protection Yes
	Maximum Operating Temperature 150°C
	Width 3 mm
	Height 0.95mm
	Length 3mm
	Standards/Approvals No
	Series MCP2562
	Automotive Standard AEC-Q100

Datasheet

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation

Implements ISO-11898-5 standard physical layer requirements

Very low standby current (Typ: 5μA)

VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O

SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes

CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus

Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus

Power-on Reset and voltage brown-out protectionon VDD and VIO pin

Microchip, CAN Transceiver 1 Mbps, 8-Pin DFN

관련된 링크들