최근 검색 기록

    SKFHN 0 20mm Hook Spanner

    RS 제품 번호:
    204-4536
    제조사 부품 번호:
    HN 0
    제조업체:
    SKF
    SKF
    모든 C Spanners 열람하기
    2 <재고있음> 5-9영업일내 홍콩 발송
    8 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each

    ₩30,020.40

    수량한팩당
    1 +₩30,020.40
    RS 제품 번호:
    204-4536
    제조사 부품 번호:
    HN 0
    제조업체:
    SKF
    COO (Country of Origin):
    SI

    제정법과 컴플라이언스

    COO (Country of Origin):
    SI

    제품 세부 사항

    SKF Hook Spanner, 16 to 20mm Jaw Capacity - HN 0


    When you need to tighten or loosen a bearing lock nut, reach for this hook spanner from SKF. It has an adjustable jaw, so it can handle nuts sized between 16 and 20mm. It's a versatile option that you can use with bearings mounted on shafts or sleeves. Thanks to its simple handheld design, you'll find it easy to operate without feeling strain. The handle is protected by a plastic covering to enhance your grip and minimise the risk of corrosion.


    • Hooked jaw design for secure hold on nut
    • Plastic handle is resistant to dirt, oil and grease, so suitable for use in harsh environments
    • Hole in the handle for easy storage
    • Laser-engraved size designation for easy identification


    Applications


    • Material handling
    • Transportation industry
    • Food and beverage production


    How do I use this spanner to adjust a bearing lock nut?


    Measure the size of the lock nut you want to remove using a tape measure or vernier calliper, then adjust the jaw to the appropriate size. Place it around the nut and slowly twist it in either direction depending on whether you want to tighten or loosen the nut.



    사양

    속성
    Maximum Jaw Capacity20mm
    Minimum Jaw Capacity16mm
    2 <재고있음> 5-9영업일내 홍콩 발송
    8 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each

    ₩30,020.40

    수량한팩당
    1 +₩30,020.40