Energizer SR41 Button Battery, 1.55 V, 7.9 mm Diameter

Subtotal (1 pack of 10 units)*

₩25,516.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 10월 23일 부터 45 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩
한팩당
한팩당*
1 +₩25,516.00₩2,552.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
683-367
제조사 부품 번호:
7638900253054
제조업체:
Energizer
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Energizer

Product Type

Button Battery

Battery Size

SR41

Chemistry

Silver Oxide

Nominal Voltage

1.55V

Battery Capacity

40mAh

Diameter

7.9mm

Termination Type

Flat Contact

Standards/Approvals

No

Weight

620mg

Height

3.6mm

IEC Code

SR41

제외

COO (Country of Origin):
CH

Energizer Button Battery, 1.55V Nominal Voltage, 40mAh Capacity - 7638900253054


This button battery is a primary silver‑oxide cell designed to deliver a steady electrical supply for small devices operating at room conditions. It provides a nominal 1.55V output with chemistry tailored for stable low‑current discharge and is intended for applications where compact, lightweight power is required. Storage and use are specified for typical ambient temperature ranges to maintain consistent performance.

Features and Benefits:


• Nominal 1.55V ensures consistent voltage for sensitive electronics
• Typical capacity 40mAh supports long service life at low drain
• Mercury‑free chemistry reduces hazardous content in the cell
• Flat contact termination enables reliable surface connection
• Lightweight 0.62g reduces overall device mass

Applications


• Suitable for powering wristwatches and timing devices
• Used with small medical instruments requiring low drain
• Ideal for precision calculators and handheld measuring tools
• Can be used for Compact sensors and keyfob electronics

What is the expected capacity under a light continuous load?


Under a 13kΩ continuous discharge at 20°C the cell typically delivers 40mAh until 1.2V.

What storage and operating temperatures are recommended?


The cell is intended for storage and discharge within a 0°C to 60°C range.

How does the termination type affect device integration?


The flat contact termination provides a broad mating surface for spring clips and PCB contact holders, simplifying mechanical retention.

What energy output can be expected at nominal conditions?


Typical energy is approximately 58mWh when discharged at 20°C down to 1.2V.

How Compact is the cell for tight assemblies?


The cell has a low profile height of 3.6mm and narrow diameter of 7.9mm for space‑constrained designs.

관련된 링크들