Energizer SR66 Button Battery, 1.55 V, 6.8 mm Diameter
- RS 제품 번호:
- 683-365
- 제조사 부품 번호:
- 7638900253023
- 제조업체:
- Energizer
Subtotal (10 units, in packs of 10)*
₩19,456.00
재고있음
- 23 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩19,456.00 | ₩1,946.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 683-365
- 제조사 부품 번호:
- 7638900253023
- 제조업체:
- Energizer
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Energizer | |
| Product Type | Button Battery | |
| Battery Size | SR66 | |
| Chemistry | Silver Oxide | |
| Nominal Voltage | 1.55V | |
| Battery Capacity | 24mAh | |
| Diameter | 6.8mm | |
| NEDA Code | 1176SO | |
| Termination Type | Flat Contact | |
| Height | 2.6mm | |
| Standards/Approvals | No | |
| Weight | 420mg | |
| Series | 377/376 | |
| IEC Code | SR66 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Energizer | ||
Product Type Button Battery | ||
Battery Size SR66 | ||
Chemistry Silver Oxide | ||
Nominal Voltage 1.55V | ||
Battery Capacity 24mAh | ||
Diameter 6.8mm | ||
NEDA Code 1176SO | ||
Termination Type Flat Contact | ||
Height 2.6mm | ||
Standards/Approvals No | ||
Weight 420mg | ||
Series 377/376 | ||
IEC Code SR66 | ||
제외
- COO (Country of Origin):
- JP
Energizer 377/376 Series Button Battery, 1.55V Nominal Voltage, 24mAh Capacity - 7638900253023
This button battery provides a stable 1.55 V supply for low continuous drain devices and intermittent high-pulse demands. It uses a silver oxide chemical system and is designed for applications requiring compact, lightweight power where consistent voltage and predictable discharge behaviour are needed at room temperature.
Features and Benefits:
• 24 mAh capacity delivers extended service at low continuous drain
• 15-30 Ω impedance supports stable voltage under Pulse loads
• Flat contact termination enables reliable surface connection
• 0.42 g mass reduces added weight in portable assemblies
• 1.2 V cut-off under load prevents deep discharge damage
• 15-30 Ω impedance supports stable voltage under Pulse loads
• Flat contact termination enables reliable surface connection
• 0.42 g mass reduces added weight in portable assemblies
• 1.2 V cut-off under load prevents deep discharge damage
Applications
• Suitable for precision timekeeping devices in Compact form factors
• Ideal for small medical instruments requiring stable voltage
• Used with low-drain sensors and measurement tags
• Can be used for portable electronic controls needing Pulse bursts
• Ideal for small medical instruments requiring stable voltage
• Used with low-drain sensors and measurement tags
• Can be used for portable electronic controls needing Pulse bursts
What typical discharge test defines the capacity value?
Capacity is measured under a continuous 47 kΩ drain at 21 °C to a 1.2 V cut-off.
How does temperature affect service performance?
Service changes with temperature, higher temperatures increase delivered service percentage compared with lower temperatures.
What electrical behaviour should be expected under Pulse demand?
The cell maintains near-nominal voltage during high-current pulses due to low internal impedance.
How is end-of-life defined for operational cut-off?
End-of-life is reached when cell voltage falls to 1.2 V under the specified load conditions.
관련된 링크들
- Energizer SR44 Button Battery, 1.55 V, 11.6 mm Diameter
- Energizer SR936 Button Battery, 1.55 V, 9.5 mm Diameter
- Energizer SR41 Button Battery, 1.55 V, 7.9 mm Diameter
- Energizer SR521SW Button Battery, 1.55 V, 5.8 mm Diameter
- Energizer Button Battery, 1.55 V, 11.6 mm Diameter
- Energizer Button Battery, 1.55 V, 6.8 mm Diameter
- Energizer 321 Button Battery, 1.55 V, 6.8 mm Diameter
- Energizer Button Battery, 1.55 V, 7.9 mm Diameter