TE Connectivity, DuraSeal Insulated, Red Crimp Bullet Connector, 22 AWG to 18 AWG, 4 mm Bullet diameter Female
- RS 제품 번호:
- 161-4995
- 제조사 부품 번호:
- B-106-8401
- 제조업체:
- TE Connectivity
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 Bag of 1000 units)*
₩2,616,380.00
재고있음
- 추가로 2026년 10월 05일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Bag(s) | Per Bag | 한팩당* |
|---|---|---|
| 1 - 1 | ₩2,616,380.00 | ₩2,616.00 |
| 2 - 3 | ₩2,537,880.00 | ₩2,538.00 |
| 4 + | ₩2,461,760.00 | ₩2,462.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 161-4995
- 제조사 부품 번호:
- B-106-8401
- 제조업체:
- TE Connectivity
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | TE Connectivity | |
| Product Type | Crimp Bullet Connector | |
| Series | DuraSeal | |
| Insulation | Insulated | |
| Insulation Material | Nylon | |
| Gender | Female | |
| Overall Length | 30mm | |
| Minimum Wire Size AWG | 22AWG | |
| Minimum Wire Size mm² | 0.5mm² | |
| Maximum Wire Size AWG | 18AWG | |
| Maximum Wire Size mm² | 1mm² | |
| Bullet Diameter | 4mm | |
| Colour | Red | |
| Contact Plating | Tin | |
| Contact Material | Copper Alloy | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 TE Connectivity | ||
Product Type Crimp Bullet Connector | ||
Series DuraSeal | ||
Insulation Insulated | ||
Insulation Material Nylon | ||
Gender Female | ||
Overall Length 30mm | ||
Minimum Wire Size AWG 22AWG | ||
Minimum Wire Size mm² 0.5mm² | ||
Maximum Wire Size AWG 18AWG | ||
Maximum Wire Size mm² 1mm² | ||
Bullet Diameter 4mm | ||
Colour Red | ||
Contact Plating Tin | ||
Contact Material Copper Alloy | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- MX
Duraseal - Bullet Terminal
Duraseal bullet Terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
관련된 링크들
- TE Connectivity, DuraSeal Insulated, Red Crimp Bullet Connector, 22 AWG to 18 AWG, 4 mm Bullet diameter Female
- RS PRO Insulated, Red Crimp Bullet Connector, 22 AWG to 16 AWG, 4 mm Bullet diameter Male
- RS PRO Insulated, Red Crimp Bullet Connector, 22 AWG to 16 AWG, 4 mm Bullet diameter Female
- RS PRO Insulated, Red Crimp Bullet Connector, 22 AWG to 16 AWG, 4.3 mm Bullet diameter Female
- RS PRO Insulated, Red Crimp Bullet Connector, 22 AWG to 16 AWG, 4.3 mm Bullet diameter Male
- Molex, 19038 Insulated, Red Crimp Bullet Connector, 22 AWG to 18 AWG, 3.96 mm Bullet diameter Female
- TE Connectivity, PIDG Insulated, Red Crimp Bullet Connector, 20 AWG to 15 AWG, 3 mm Bullet diameter Male
- TE Connectivity, PIDG Insulated, Red Crimp Bullet Connector, 20 AWG to 16 AWG, 4 mm Bullet diameter Female