Vishay Bridge Rectifier, 2A, 50V, 4-Pin
- RS 제품 번호:
- 468-1603
- 제조사 부품 번호:
- VS-2KBP005
- 제조업체:
- Vishay
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 5 units)*
₩12,821.60
재고있음
- 추가로 2025년 12월 29일 부터 35 개 단위 배송
- 추가로 2026년 1월 05일 부터 90 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 - 120 | ₩2,564.32 | ₩12,821.60 |
| 125 - 245 | ₩2,504.16 | ₩12,520.80 |
| 250 + | ₩2,466.56 | ₩12,332.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 468-1603
- 제조사 부품 번호:
- VS-2KBP005
- 제조업체:
- Vishay
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Vishay | |
| Peak Average Forward Current | 2A | |
| Bridge Type | Single Phase | |
| Peak Reverse Repetitive Voltage | 50V | |
| Mounting Type | Through Hole | |
| Package Type | D 44 | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 63A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -40 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 10µA | |
| Dimensions | 17.5 x 6.8 x 15mm | |
| Length | 17.5mm | |
| Width | 6.8mm | |
| Height | 15mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Vishay | ||
Peak Average Forward Current 2A | ||
Bridge Type Single Phase | ||
Peak Reverse Repetitive Voltage 50V | ||
Mounting Type Through Hole | ||
Package Type D 44 | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 63A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -40 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 10µA | ||
Dimensions 17.5 x 6.8 x 15mm | ||
Length 17.5mm | ||
Width 6.8mm | ||
Height 15mm | ||
Vishay 2KBP Series Bridge Rectifiers
A 2 A single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. They are intended for general applications in industrial and consumer equipment.
Suitable for printed circuit board mounting
Compact construction
High surge current capability
Compact construction
High surge current capability
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
관련된 링크들
- Vishay Bridge Rectifier, 2A, 50V, 4-Pin
- Vishay Bridge Rectifier, 2A, 400V, 4-Pin
- Vishay Bridge Rectifier, 2A, 100V, 4-Pin
- Vishay Bridge Rectifier, 2A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 2A, 600V, 4-Pin
- Vishay Bridge Rectifier, 2A, 200V, 4-Pin
- Vishay Bridge Rectifier, 2A, 800V, 4-Pin
- Vishay Bridge Rectifier, 8A, 50V, 4-Pin
