Vishay Bridge Rectifier, 2A, 800V, 4-Pin
- RS 제품 번호:
- 395-2982
- 제조사 부품 번호:
- VS-2KBP08
- 제조업체:
- Vishay
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 5 units)*
₩14,081.20
재고있음
- 추가로 2026년 1월 19일 부터 35 개 단위 배송
- 추가로 2026년 1월 26일 부터 70 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 - 120 | ₩2,816.24 | ₩14,081.20 |
| 125 - 245 | ₩2,744.80 | ₩13,724.00 |
| 250 + | ₩2,703.44 | ₩13,517.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 395-2982
- 제조사 부품 번호:
- VS-2KBP08
- 제조업체:
- Vishay
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Vishay | |
| Bridge Type | Single Phase | |
| Peak Average Forward Current | 2A | |
| Peak Reverse Repetitive Voltage | 800V | |
| Mounting Type | Through Hole | |
| Package Type | D 44 | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 63A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -40 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 10µA | |
| Length | 17.5mm | |
| Dimensions | 17.5 x 6.8 x 15mm | |
| Width | 6.8mm | |
| Height | 15mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Vishay | ||
Bridge Type Single Phase | ||
Peak Average Forward Current 2A | ||
Peak Reverse Repetitive Voltage 800V | ||
Mounting Type Through Hole | ||
Package Type D 44 | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 63A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -40 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 10µA | ||
Length 17.5mm | ||
Dimensions 17.5 x 6.8 x 15mm | ||
Width 6.8mm | ||
Height 15mm | ||
- COO (Country of Origin):
- IN
Vishay 2KBP Series Bridge Rectifiers
A 2 A single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. They are intended for general applications in industrial and consumer equipment.
• Suitable for printed circuit board mounting
• Compact construction
• High surge current capability
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
관련된 링크들
- Vishay Bridge Rectifier, 2A, 800V, 4-Pin
- Vishay Bridge Rectifier, 2A, 100V, 4-Pin
- Vishay Bridge Rectifier, 2A, 200V, 4-Pin
- Vishay Bridge Rectifier, 2A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 2A, 50V, 4-Pin
- Vishay Bridge Rectifier, 2A, 400V, 4-Pin
- Vishay Bridge Rectifier, 2A, 600V, 4-Pin
- Vishay Bridge Rectifier, 8A, 800V, 4-Pin
