대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩95,460.00
재고있음
- 추가로 2026년 10월 12일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩95,460.00 |
| 6 - 11 | ₩91,820.00 |
| 12 + | ₩88,820.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 339-8669
- 제조사 부품 번호:
- FY 35 TF
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 35mm | |
| Number of Mount Holes | 4 | |
| Material | Cast Iron | |
| Length | 118mm | |
| Width | 118mm | |
| Depth | 46.4mm | |
| Mount Hole Size | 14 mm | |
| Mount Hole Centre-to-Centre | 92mm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 35mm | ||
Number of Mount Holes 4 | ||
Material Cast Iron | ||
Length 118mm | ||
Width 118mm | ||
Depth 46.4mm | ||
Mount Hole Size 14 mm | ||
Mount Hole Centre-to-Centre 92mm | ||
Standards/Approvals No | ||
제외
- COO (Country of Origin):
- IT
SKF Cast-Iron Flange Bearing Unit, 4 Holes, 35mm ID - FY 35 TF
This SKF flange bearing unit is made up of a spherical bearing insert held in a square casing. Thanks to the four mounting holes, it's simple to attach to the body of a machine or on a wall. The flange design holds the bearing insert in place to prevent axial movement for greater stability. It's sealed using nitrile and fabric seals for resistance to dust, oil and moisture. Keeping contaminants out and lubricants in ensures high levels of efficiency and minimal maintenance.
• Cast-iron housing material has excellent impact resistance for long-lasting performance
• Limiting speed of 5300rpm (rotations per minute) for use in high-speed applications
• Additional flingers provide added protection against dust and moisture by pitching contaminants away
Applications
• Material handling applications
• Power transmission
• Agricultural equipment
What hardware do I need to mount this unit?
This unit is simple to mount. Insert it on a machine shaft and tighten it in place with M6 x 0.75 set screws. You can also use 12mm attachment bolts to lock it in place. The recommended tightening torque is 4Nm.