SKF 4 Hole Cylindrical, FYC 30 TF 30 mm ID
- RS 제품 번호:
- 212-4569
- 제조사 부품 번호:
- FYC 30 TF
- 제조업체:
- SKF
Subtotal (1 unit)*
₩125,200.00
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩125,200.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 212-4569
- 제조사 부품 번호:
- FYC 30 TF
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Flange Bearing Unit | |
| Inside Diameter | 30mm | |
| Number of Mount Holes | 4 | |
| Locking Type | Set Screw | |
| Material | Cast Iron | |
| Length | 125mm | |
| Width | 40.2mm | |
| Depth | 32.2mm | |
| Mount Hole Size | 11.99 mm | |
| End Type | Open | |
| Mount Hole Centre-to-Centre | 70.61mm | |
| Series | FYC | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Limiting Speed | 6300rpm | |
| Static Load Rating | 11.2kN | |
| Dynamic Load Rating | 19.5kN | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Flange Bearing Unit | ||
Inside Diameter 30mm | ||
Number of Mount Holes 4 | ||
Locking Type Set Screw | ||
Material Cast Iron | ||
Length 125mm | ||
Width 40.2mm | ||
Depth 32.2mm | ||
Mount Hole Size 11.99 mm | ||
End Type Open | ||
Mount Hole Centre-to-Centre 70.61mm | ||
Series FYC | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Limiting Speed 6300rpm | ||
Static Load Rating 11.2kN | ||
Dynamic Load Rating 19.5kN | ||
- COO (Country of Origin):
- IT
SKF Flanged Bearing Unit, Round Housing Type, 30mm Shaft Diameter, 31mm Overall Housing Width - FYC 30 TF
Looking for a heavy load capacity bearing to handle harsh settings? Try this round flanged bearing unit from SKF. It consists of a temperature and moisture-resistant cast iron housing that's compatible with demanding environments. Encased within is an insert bearing with an extended inner ring for easy and secure shaft mounting. The versatile component copes with both constant and alternating rotational directions, which makes it a practical choice for use in agricultural machinery.
Features & Benefits
• Quiet operation cuts down on noise pollution
• Relubrication holes for quick and easy regreasing
• Minimal vibration reduces heat generation for superior equipment efficiency
• Sealed bearing resists contamination for an extended lifespan in polluted locations
Applications
• Robotics systems
• Seismology equipment
• Paper and pulp mills
What's the dynamic load rating of this product?
With a basic dynamic load rating of 19.5kN and a limiting speed of 6300r/min, this flanged bearing unit deals with heavy loads without compromising on speed.
Are the mounting holes on this unit pre-drilled?
Yes. For convenience, this component comes with predrilled mounting holes, so it's a cinch to bolt to a frame or panel.
관련된 링크들
- SKF 4 Hole Cylindrical, FYC 65 TF 65 mm ID
- SKF 4 Hole Cylindrical, FYC 60 TF 60 mm ID
- SKF 4 Hole Cylindrical, FYC 50 TF 50 mm ID
- SKF 4 Hole Cylindrical, FYC 40 TF 40 mm ID
- SKF 4 Hole Cylindrical, FYC 35 TF 35 mm ID
- SKF 4 Hole Cylindrical, FYC 55 TF 55 mm ID
- SKF 4 Hole Cylindrical, FYC 25 TF 25 mm ID
- SKF 4 Hole Cylindrical, FYC 45 TF 45 mm ID
